I'm in the middle of building a new motor but dont know what intake and cam to use. I have a roller 302 block all the machine work done, 331 eagle stroker kit, H-beam rods, forged probe pistons. It has 10.5:1 compression, edelbrock Victor jr heads, crane 1.6 rockers, hardend pushrods, Long tube 1 7/8 headers. I have a set of 24lbs injectors, 70mm tb, and 75mm mass air meter. If possible i want to still use these items but will replace them if i have too. This is going into a 91 notchback, with a 5 spd, and 3:73 gears. It also will be driven daily (i know the heads are a lil big but its what i have) I want something that is still streetable, and idles fairly good. What cam and intake do i use???? Any help would be appriciated...