• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

Finished 5.0 brake and suspension swap

  • Thread starter Thread starter TheNoachSHO
  • Start date Start date May 1, 2004
T

TheNoachSHO

New Member
Nov 1, 2003
79
0
0
May 1, 2004
#1
  • May 1, 2004
  • #1
Well I fiannly finished my 5.0 brake upgrade and installation of Saleen Spec GR-2's.

My cars handles crazy good now. It was a long day of work. I highly recamend doing this. The GR-2's are great shocks. Amazingly stiff. Good alternative to Koni's if cash funds arent there.

Few notes....
your alignment with be seriously ****** up. Didn't take the time to analyze the spindle differences but even with the shocks adjusted all the way out I still had to move the tie rods out over a half inch.

I feel VERY LUCKY I was able to unbolt the brake lines without twisting them apart. Plan to replace these if you do do the swap. With the age of our cars it's likely that they will break.

Removing the spindles was a PITA. Heat was the only way to get them off after two pickle forks meet there death.

The GR-2 if I paid full price for the whole setup would have been around $160 or so. Of course working for Advance get's me my 20%.

If anyone has questions of needs part numbers let me know.
 

Red_LX

I’m not much help unless you’re looking for ****!
Founding Member
Nov 29, 1999
5,896
73
129
45
Morgantown, WV...where couches meet their doom
May 1, 2004
#2
  • May 1, 2004
  • #2
Yeah, gettin the spindles off is a bitch. When I did mine I ended up supporting the spindle on either side with blocks of wood, and putting a big punch in the middle of the ball join stud and whacking it with a BFH. That got em apart pretty good.
 

Asha'man

Founding Member
Feb 5, 2002
1,909
0
0
41
Denver
May 1, 2004
#3
  • May 1, 2004
  • #3
Which brake lines are you talking about, the soft ones? I'll have to remember that. Did you keep your stock springs? What did you heat after the pickle forks died on you, the spindle itself or the balljoint? I'm still in the parts-gathering stage, hoping to do it all in late May or early June.

Ash
 
T

TheNoachSHO

New Member
Nov 1, 2003
79
0
0
May 2, 2004
#4
  • May 2, 2004
  • #4
Asha'man said:
Which brake lines are you talking about, the soft ones? I'll have to remember that. Did you keep your stock springs? What did you heat after the pickle forks died on you, the spindle itself or the balljoint? I'm still in the parts-gathering stage, hoping to do it all in late May or early June.

Ash
Click to expand...

No the hard lines. You have to swap over the 5.0 soft lines and when undoing the hard lines from the soft they tend to want to stick and twist apart.

Stock springs are still in but planning to put in Eibach Pro lines.

I heated the spindle right on the part that wraps the ball joint.

Good luck.
 

1993 2.3LX

New Member
Apr 27, 2004
16
0
0
45
North Florida
May 4, 2004
#5
  • May 4, 2004
  • #5
How much do new 5.0 spindles cost?
 
T

TheNoachSHO

New Member
Nov 1, 2003
79
0
0
May 5, 2004
#6
  • May 5, 2004
  • #6
New I have no idea but I picked up my spindles, rotors, brake lines, calipers, and pads for $75.
 
M

manny

Founding Member
Dec 5, 2001
590
6
16
68
TAMPA FL
May 9, 2004
#7
  • May 9, 2004
  • #7
with that swap can you still run the 15" stock wheels?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,945
224
Massachusetts
May 9, 2004
#8
  • May 9, 2004
  • #8
yes. 5.0's had 15" wheels up til 1990
 
You must log in or register to reply here.

Similar threads

Y
Resolved 5 lug conversion
  • Ybfav84
  • Dec 21, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
612
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 21, 2024
AeroCoupe
S
what would you do? sell the project and buy completed or finish project?
  • STANG32
  • Feb 8, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
609
1965 - 1973 Classic Mustangs -General/Talk- Feb 16, 2025
rusty428cj
Progress Thread "Alter Ego" White 1993 LX 5.0 5spd
  • idareu
  • Sep 9, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 19, 2025
idareu
Granada Front Disc, 9” Drum Rear, 86 Bronco II MC, and Manual Brakes - Pedal Slack
  • AeroCoupe
  • Jul 8, 2023
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
7
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Jul 14, 2023
AeroCoupe
Progress Thread Nicholase "lights out" build-
  • nicholase
  • Aug 10, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 26 27 28
Replies
552
Views
40K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 27, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?