• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

First time at the 1/4 mile track

  • Thread starter Thread starter DiabloRojoStang
  • Start date Start date May 22, 2004

DiabloRojoStang

Founding Member
Aug 9, 2001
201
0
0
Maryland
May 22, 2004
#1
  • May 22, 2004
  • #1
I hit the track lastnight for the first time. I had a best of 15.1 @94mph. Lots of spin out of first. My reaction time was .74 and my 60ft. was 2.1. I raced 6 times and my last was my best. Motor's stock except for the CAI. Any suggestions on car upgrades and driver improvements? And take it easy, it was my first time on a 1/4 mile track. Also, My last race was against a 5.0 that looked close to stock with maybe a few bolt-ons. He had a better reaction of .62 but his 60 ft. was 2.2. He finished with a 14.6 @ 94. Not sure if that helps any. Could I be in the mid 14's with what I have?
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
May 22, 2004
#2
  • May 22, 2004
  • #2
well the reation time play no parts what so even in the time you run, so pay no attenetion to that at the track. as for the 60ft time, it's not too bad, it could be a bit better though. i do think there is about a 1/2 sec worth of improvement in the driver, because the car "should" have a little more in it. then again it all comes down to how well it was maintained. it's hard to really say, but it looks like you are either getting wheel spin on your gears shifts, or you are shifing like your grandma just work on getting your 60ft down a hair more or try to limit wheel spin when hitting the next gear. that's my .02 anyway
 

DiabloRojoStang

Founding Member
Aug 9, 2001
201
0
0
Maryland
May 23, 2004
#3
  • May 23, 2004
  • #3
c2see21 said:
well the reation time play no parts what so even in the time you run, so pay no attenetion to that at the track. as for the 60ft time, it's not too bad, it could be a bit better though. i do think there is about a 1/2 sec worth of improvement in the driver, because the car "should" have a little more in it. then again it all comes down to how well it was maintained. it's hard to really say, but it looks like you are either getting wheel spin on your gears shifts, or you are shifing like your grandma just work on getting your 60ft down a hair more or try to limit wheel spin when hitting the next gear. that's my .02 anyway
Click to expand...
I was spinning pretty bad in first and a little in second. The 5.0 I raced in the last one got a better launch but I was pulling on him til the end. Just couldn't catch up.
 
You must log in or register to reply here.

Similar threads

Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
279
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
589
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
907
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
H
Fuel starvation issues, 91 EFI to carb swap. Car dying after 1-3 gallons used. EFI tank, electric fuel pump, bypass regulator. Dual fed carb
  • hassler
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
766
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
nickyb
Aod to t5 swap will it live?
  • 87slow.0
  • Nov 5, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
493
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 5, 2024
87slow.0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?