five pin flasher?

[moosetang408w]

So I am wiring up my project build so all of my original wiring is gone. The rewiring has been going smooth but I forgot one thing. Flashers. I have a flasher that came in the car. It is five pin and looks like a relay now the problem is the pin out. I know one goes to hot all time, one to hot run, two into the multi switch, and one gnd. But how can I tell which is which? If anyone could even tell me the color of the wires coming off of the five pins I can use my haynes manual to figure it out. Please help me out! It is the last piece of the puzzle on my project. Cheers

I know the wires coming out are:
PPL/Org
Red/White
Lt Blue
Wht/Red
Blk

 

[moosetang408w]

Anyone?

 

[HISSIN50]

Not sure if this will help..........

P/O: Fuse 1

R/W:Fuse 9

LB: MF switch terminal H (looks to me like this is the relay-input for turn signals).

W/R:MF switch terminal I (looks to me like this is the relay-input for hazards).

Bk: ground.

 

[moosetang408w]

Thanks for the reply but I now where the colored wires go to. But I don't know where they go on the five pin flasher itself.