Fixed my vibration problems...Yay

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
I had a bad vibration problem right around 1500-2000 rpm when i would press in the clutch and it would vibrate on its way down through those rpms, also hung around those rpms for a couple seconds. I changed my lifters because of another problem and now the vibration problem is totally gone :banana: Here I thought it was a rotating assembly problem or a wrong balance flywheel :bang: Just letting everyone know for anyone with a vibration problem
 
87stangdiddle said:
I had a bad vibration problem right around 1500-2000 rpm when i would press in the clutch and it would vibrate on its way down through those rpms, also hung around those rpms for a couple seconds. I changed my lifters because of another problem and now the vibration problem is totally gone :banana: Here I thought it was a rotating assembly problem or a wrong balance flywheel :bang: Just letting everyone know for anyone with a vibration problem
Glad to hear that!!! Oh and thanks for the free post! :Teh-Win:
 
Yes from what i could see through the holes in the block the cam looked fine, it was just that the lifters werent pumping up(lots of tapping) that i guess not everything was in synchro with each other, i guess u could call it.

I felt it from the engine, i seriously thought it was from not having the shortblock balanced when i built it or from having the wrong balance billet flywheel. Once I put in the new lifters BAAM no more vibration :banana: Now the rpms drop down right away and not slow down around 1500-200 rpm which is when it vibrated. It was coming from the engine, and I felt it pretty good from my drivers seat. Im glad I didnt go ripping the trans or engine apart :p