Flamethrower for the 4.6L

utrocketman · Jan 30, 2008

I have always been intrigued with the idea of a flamethrower. However I have never been very satisfied with the traditional method. It seems counter productive to interrupt your ignition to get enough fuel down the pipes to produce a flame and if your are dealing with a 4.6L it is even harder to get enough un-burnt fuel to the pipes not to mention a high probability of causing muffler damage or worse.
I have been banging around the idea of taking the fuel to the end of the exhaust pipe independently of the motor and exhaust system. Possible a separate pump and or separate tank just for that purpose. Mounting a nozzle very near the end of the exhaust pipe with some kind of igniter. Since I really dislike reinventing the wheel I was hoping someone out there had done this.
Dave

Rusty67 · Jan 30, 2008

I'm sorry but this is just..... stupid. You want a good reason why its dumb ? Here is one. If you have a standard rear exit exhaust you are going to screw up the paint on the rear bumper. Thats just an asthetic reason why it is stupid. There are other reasons too.... like safety. You are creating flames near your gas tank. Darwin award waiting to happen. I had a friend get his gas tank punctured and he lost all of his fuel out the bottem of his tank. That happens to you and your flames are going off.... well I'll let you figure it out.

jivepepper · Jan 30, 2008

Do it!! You'll be uber cool like this guy!

d98gt · Jan 30, 2008

I once had a video of my car popping a flame out of both tailpipes at the track I "missed" a gear in my automatic and once it bounced the rev limiter it resulted in a small burst of flame

scupking · Jan 30, 2008

Heck if your giong to do that why don't you go all the way and make a jet car like Les Shockley jet truck. That would be cool to see a jet powered mustang at an arishow or track that could do 0-370mph in only 7 seconds.

fobra559 · Jan 30, 2008

scupking said:
Heck if your giong to do that why don't you go all the way and make a jet car like Les Shockley jet truck. That would be cool to see a jet powered mustang at an arishow or track that could do 0-370mph in only 7 seconds.

That would awesome, but I would have one hell of a time controlling that much power.

forum155pl · Jan 30, 2008

people use propane for that.. not gasoline.. your asking for trouble with gas.. youll blow your ass up

chrisconsin · Jan 30, 2008

heres a vid of 4.6 with a thrower

http://www.6to8mustang.com/mustang/fvid2.mpg

heres the thread on how he did it

http://forums.stangnet.com/showthread.php?t=402773

.
if you do a search you should find what your looking for, this idea poped in my head a while back. But after reading what you have to modify to make it work. I decided it wasnt worth the trouble or the ticket.

CobraRed_96_GT · Jan 30, 2008

chrisconsin said:
heres a vid of 4.6 with a thrower

http://www.6to8mustang.com/mustang/fvid2.mpg

heres the thread on how he did it

http://forums.stangnet.com/showthread.php?t=402773

.
if you do a search you should find what your looking for, this idea poped in my head a while back. But after reading what you have to modify to make it work. I decided it wasnt worth the trouble or the ticket.

I actually thought about it about 2 years ago since it'd be sick with side pipes. But it's too sketchy and illegal so i didn't

mrvax · Jan 30, 2008

I have to move this thread.

mazen189 · Jan 30, 2008

just do it , but if your going to do it, make it right.......no half ass. Something like this is serious when dealing with your car....and ur life. So, if your going to do it, make sure you follow the book.

ceracer33 · Jan 31, 2008

if i were going to put some kinda flame kit on my car i would set up some sort of jet that would spray fuel into the exhaust after the mufflers and put something in the pipe to ignite it, i think that would be much safer. u could easily use a nitrous nozzle with a seperate fuel tank/line then all u would need is a spark. that might be a little difficult to come by but im sure they make something simple for it.

Flamethrower for the 4.6L

utrocketman

New Member

Rusty67

jivepepper

Attachments

d98gt

scupking

Active Member

fobra559

At least it's more erect and not floppy anymore.

forum155pl

New Member

chrisconsin

Member

CobraRed_96_GT

Active Member

mrvax

Stay thirsty my friends

mazen189

Member

ceracer33

New Member

Similar threads

Flamethrower for the 4.6L

New Member

Attachments

Active Member

At least it's more erect and not floppy anymore.

New Member

Member

Active Member

Stay thirsty my friends

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency