• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Flaming river steering shaft

  • Thread starter Thread starter load71
  • Start date Start date Mar 5, 2006

load71

New Member
Oct 28, 2004
68
0
0
Mar 5, 2006
#1
  • Mar 5, 2006
  • #1
I just took my motor out, and Im getting new long tubes from Jet-Hot and I was wondering if the flaming river steering shaft is smaller in size than the one that is one there now. One of the primarys was rubbing on the shaft! I also am putting in a Pa K-member for more clearance Thanks
 

svtxtreme

New Member
Jun 5, 2005
10
0
0
Mar 5, 2006
#2
  • Mar 5, 2006
  • #2
load71 said:
I just took my motor out, and Im getting new long tubes from Jet-Hot and I was wondering if the flaming river steering shaft is smaller in size than the one that is one there now. One of the primarys was rubbing on the shaft! I also am putting in a Pa K-member for more clearance Thanks
Click to expand...


I have everything you are looking at doing and mine does not rub but it is tight. I do not know if it is smaller or not. Hope that helps.
 

load71

New Member
Oct 28, 2004
68
0
0
Mar 5, 2006
#3
  • Mar 5, 2006
  • #3
Thanks... I just dont want the shaft to rub on my 500 set of headers! Do you have a part number for the shaft thanks?
 

KDK1988GT

Founding Member
Jan 7, 2002
1,937
0
37
Fredericton
Mar 5, 2006
#4
  • Mar 5, 2006
  • #4
I'm quite sure that its smaller then the stock shaft...

was this the setup you are going to go with ?

http://www.flamingriver.com/index.c...ategory_id=68/home_id=62/mode=prod/prd222.htm
 

load71

New Member
Oct 28, 2004
68
0
0
Mar 5, 2006
#5
  • Mar 5, 2006
  • #5
KDK1988GT said:
I'm quite sure that its smaller then the stock shaft...

was this the setup you are going to go with ?

http://www.flamingriver.com/index.c...ategory_id=68/home_id=62/mode=prod/prd222.htm
Click to expand...

NO, i didnt know what i was going with, i just remember reading something about their shafts being smaller! But that was exactly what i was looking for? Do you run it, or any one? Does it allow more clearance then the stock piece? Thanks
 

KDK1988GT

Founding Member
Jan 7, 2002
1,937
0
37
Fredericton
Mar 5, 2006
#6
  • Mar 5, 2006
  • #6
well from what is says on the page.. I would think that it helps by giving "improved header clearance"

no I do not run one...
 
You must log in or register to reply here.

Similar threads

Exhaust 1 3/4” Long Tubes on a Fox Body AOD – Easiest route?
  • 5.0 Mike
  • Mar 19, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Mar 21, 2025
5.0 Mike
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
511
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
467
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
SOLD SOLD!!!! 1993 Notchback Roadracer For Sale. She's a beast!
  • Boydster
  • Apr 25, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
1K
Fox Body Mustangs For Sale (1979-93) Apr 25, 2025
Boydster
D
2008 Bullitt take-off parts (muffs & shaft)... recycle or resell?
  • D-Tex
  • Nov 3, 2024
  • What is it Worth?!?!?
Replies
4
Views
473
What is it Worth?!?!? Nov 3, 2024
D-Tex
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?