Flow difference from ported Cobra vs Performer

[9 Deuce GT]

Just wondering what the difference in flow is between a PORTED Cobra lower and a PORTED Edl. Performer lower.

 

[9 Deuce GT]

Anyone?

 

[Highbredcloud]

assuming both will get identical port jobs...well that virtually becomes the same as stock vs stock...the Performer may outflow the Cobra by 10cfm...if that...not enough to notice...get whatever is a cheaper find...both good intakes...with lots of potential...

 

[Highbredcloud]

I see you are running AFR's...I run ported lower GT-40 intake with a Cobra upper on my 165's...the car pulls hard from 3000-6000RPM...you won't be disappointed...I had Tmoss port mine...

 

[90Notch]

In the words of Ed from FTI...the Performer is the best intake out there in its class bar none.

 

[9 Deuce GT]

I already have a Cobra intake. It has been ported by TMOSS. This post is not for opinions about which intake I should buy. I am just interested to see by how much a ported Performer will outflow a ported Cobra.

 

[Grn92LX]

This is a question thats impossible to answer. It depends entirely on who ported it, if they ported it based on a specific goal or if they just hogged the piss out of it. A ported performer is definatly better than a ported cobra. No one can say "only 10cfm" absolutely impossible to say. With what you have, i'd say your looking for a mild 300hp combo with 6000 max shifts. Leave the cobra. If you were serious about looking to go fast, then you'd need to change more than just the manifold.

 

[tmoss]

The Performer has more usable room to port than a Cobra and can be made to flow more with less work, but below 250-260cfm, the Cobra will hang right with the Performer if ported by a pro. I'm not talking welding and gettin crazy here either.