• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Flowmasters out...Super Turbos and Tailpipes are in. It’s super quiet .

  • Thread starter Thread starter deathb4dismount
  • Start date Start date Mar 16, 2019
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Mar 16, 2019
#1
  • Mar 16, 2019
  • #1
I was excited to get out there but it wasn’t even an enjoyable ride. I can’t take another season of these. I’m going to order super turbos. Any one know the correct part number for 2.5 inch inlet outlet?
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Mar 16, 2019
#2
  • Mar 16, 2019
  • #2
What flowmasters are you running?
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Mar 16, 2019
#3
  • Mar 16, 2019
  • #3
40s. They sound awesome, if you’re a spectator. Other than that they suck. My 5 year old refers to the mustang as “the loud car”.
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Mar 16, 2019
#4
  • Mar 16, 2019
  • #4
My car has some sort of Frankenstein exhaust on it with flow masters. The po put Hedman steel headers, some sort of x pipe (catted) and flowmasters. Not sure of the series, but I hear more engine inside when I get on it. It sounds mellow from the outside. I like it. They are black flowmasters that look fairly old. I’d like to hear the turbos your talking about. At the LMR website, you can go to the Flowmaster American thunder section and hear it on a red car. I love that sound.
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Mar 16, 2019
#5
  • Mar 16, 2019
  • #5
BlakeusMaximus said:
My car has some sort of Frankenstein exhaust on it with flow masters. The po put Hedman steel headers, some sort of x pipe (catted) and flowmasters. Not sure of the series, but I hear more engine inside when I get on it. It sounds mellow from the outside. I like it. They are black flowmasters that look fairly old. I’d like to hear the turbos your talking about. At the LMR website, you can go to the Flowmaster American thunder section and hear it on a red car. I love that sound.
Click to expand...

I’d bet they are 40 series or 44s. I had them on a previous car with a catted h pipe and it was actually not too bad but motor was all stock. With the the cam and off road h though they are just too much. I know a catted mid pipe would help, but that has to wait for longtubes. I’m just looking for a quiet muffler and the general consensus is super turbos are the quietest
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Mar 16, 2019
#6
  • Mar 16, 2019
  • #6
Yeah that’s what I was thinking. 44’s are louder then 40’s? I dunno, probably the same. I would like to change my exhaust just for the appearance only, but I like the sound. Definitely want new headers, they look like .
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Mar 16, 2019
#7
  • Mar 16, 2019
  • #7
I’ll get some pics of it when I go back to work, the rear pipes look funny. Thank god they are hidden behind the bumper.
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Mar 16, 2019
#8
  • Mar 16, 2019
  • #8
deathb4dismount said:
I’d bet they are 40 series or 44s. I had them on a previous car with a catted h pipe and it was actually not too bad but motor was all stock. With the the cam and off road h though they are just too much. I know a catted mid pipe would help, but that has to wait for longtubes. I’m just looking for a quiet muffler and the general consensus is super turbos are the quietest
Click to expand...

Your car doesn’t have cats?
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Mar 16, 2019
#9
  • Mar 16, 2019
  • #9
BlakeusMaximus said:
Your car doesn’t have cats?
Click to expand...

The 44s are just a low pro 40 I believe. Yah no cats, came with the car
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Mar 16, 2019
#10
  • Mar 16, 2019
  • #10
Ahh the voice of reason....." I've just turned 30, and I can't stand myself anymore.....WTF was I thinking? This sht isn't cool, it's just freakin noisy!!!".


Time for a real muffler.
 
Reactions: 7991LXnSHO

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,491
8,735
234
S.I.NY
Mar 16, 2019
#11
  • Mar 16, 2019
  • #11
Putting borla XS pro on mine when i do the 3 inch exhaust . Should be decent at cruise and idle from what I hear
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Mar 17, 2019
#12
  • Mar 17, 2019
  • #12
CarMichael Angelo said:
Ahh the voice of reason....." I've just turned 30, and I can't stand myself anymore.....WTF was I thinking? This sht isn't cool, it's just freakin noisy!!!".


Time for a real muffler.
Click to expand...

I remember first beer too, mike. In my defense, minus the cam lope, I bought the car like this. Oh, btw do you know what part number?
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Mar 17, 2019
#13
  • Mar 17, 2019
  • #13
If you're talking about the Dynmax Super Turbos. I had a set and they were quiter than the 40 series Flowmaster Delta Flows I have now. The reason I swapped them for the Flowmasters is because they didn't sound good with the aluminum heads and cam I have. They sounded great with the stock heads.
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Mar 17, 2019
#14
  • Mar 17, 2019
  • #14
deathb4dismount said:
I remember first beer too, mike. In my defense, minus the cam lope, I bought the car like this. Oh, btw do you know what part number?
Click to expand...
Hey I get it,..I used to drive my Mach 1 with open headers once or twice, and on drag slicks all summer long.

Would I do any of that sht now? Hell no, ( But there was that drag race in front of the Pascagoula PD that got me and @stangboy pulled over just last year..)
 
Reactions: stangboy and deathb4dismount

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Mar 17, 2019
#15
  • Mar 17, 2019
  • #15
Dan02gt said:
If you're talking about the Dynmax Super Turbos. I had a set and they were quiter than the 40 series Flowmaster Delta Flows I have now. The reason I swapped them for the Flowmasters is because they didn't sound good with the aluminum heads and cam I have. They sounded great with the stock heads.
Click to expand...

Yah, I’m looking for the Dynomax Super Turbos.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,037
1,625
194
NJ
Mar 17, 2019
#16
  • Mar 17, 2019
  • #16
I'm swapping my dynomax Ultraflo welded mufflers out for super turbo's soon.
Apparently ultraflo welded mufflers are the old race magnums.
I called dynomax, got a rookie on the phone, gave him my kit number and he gave me the part numbers to the 2.25 super turbo's (which is not what I need).
By matching up sizes of my ultraflo's, I came up with the 17629 as the correct super turbo (please research, I haven't tried it yet).

My car is pretty loud. Not terrible when cruising, but still i'm not really up for turning heads for a 1/4 mile in each direction, every time I start it up.

I wanted to add resonators, but because I use the x pipe (bassani stainless) off a 1996 cobra, it's just too close on the drivers side and i'm not up for a stainless exhaust project this year. I don't have cats either nor will they fit effortlessly.

I hope the super turbo's are as quiet as everyone suggests they are.
 
Last edited: Mar 17, 2019

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,447
1,531
194
Maryland
Mar 17, 2019
#17
  • Mar 17, 2019
  • #17
CarMichael Angelo said:
Ahh the voice of reason....." I've just turned 30, and I can't stand myself anymore.....WTF was I thinking? This sht isn't cool, it's just freakin noisy!!!".


Time for a real muffler.
Click to expand...

I just took a ride after a long down time. Flowmaster 40's here and I love it. I'm 54, and "unrefined" I guess. I quit smoking, quit drinking, no drugs (for many years anyway). But, you cant have my loud exhaust or loud music, (of which I have a wide genre preference).

Now, when I hear an LS Camaro go by with cutouts in open mode, that's annoying to me.
 
Reactions: Olivethefet

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,959
10,600
203
polk county florida
Mar 17, 2019
#18
  • Mar 17, 2019
  • #18
What was that?
I can't here you clearly
Tennitus y'all
Oh, and I still play my music loud
 

02 281 GT

Agreed...My wife has great Boobs
15 Year Member
Feb 3, 2009
3,208
1,972
194
Cabot, AR
Mar 18, 2019
#19
  • Mar 18, 2019
  • #19
Dynomax 17734.
 
Reactions: deathb4dismount

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Mar 18, 2019
#20
  • Mar 18, 2019
  • #20
02 281 GT said:
Dynomax 17734.
Click to expand...

Ordered
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

P
Tailpipes for '88 GT
  • pindude80
  • Apr 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
31
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 13, 2025
pindude80
P
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
967
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
227
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
600
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?