• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Flywheel question

  • Thread starter Thread starter dbarr
  • Start date Start date Sep 19, 2007
D

dbarr

New Member
Jan 29, 2007
13
0
0
Sep 19, 2007
#1
  • Sep 19, 2007
  • #1
I recently bought a King Cobra clutch and decided to get an F1 racing aluminum flywheel also. I'm very confused about flywheel balance. The flywheel comes with a 28oz weight and a 50oz weight. I've heard ppl say that they installed aftermarket flywheels with no balance, and had no problems. I've heard other ppl say that they took the flywheel and the clutch to the machine shop and had them neutral balance it. Someone please tell me exactly what I should do. Should I have the flywheel balanced, with the clutch, with the weights on or off, which weights should I put on and how do I know where to put them?

This is on a 93 cobra btw.
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Sep 19, 2007
#2
  • Sep 19, 2007
  • #2
unless your motor is balanced i wouldn't mess with it and get a 50oz flywheel.
 
D

dglanz

New Member
Oct 30, 2005
9
0
0
Sep 19, 2007
#3
  • Sep 19, 2007
  • #3
Unless you are running an internally balanced motor, you will need to install one of the included weights. Early 289/302 and all 351W require a 28 oz-in imbalance on the harmonic balancer and flywheel/flexplate. Late 302 (I think after 1981) require a 50 oz-in imbalance on the balancer and flywheel/flexplate.

So, if you are running at 302, you will need to run the 50 oz-in weight, if you are running a 351W, you will need to install the 28 oz-in weight.

Most of the stroker kits require the 28 oz-in weight. Hope this helps.
 

Cobra912

Active Member
May 1, 2005
1,777
11
39
Wish I was anywhere but here
Sep 20, 2007
#4
  • Sep 20, 2007
  • #4
Just went throgh al this research myself. Pretty sure if you are putting this on your 93 cobra with the stock 302 5.0 and not a stroker kit etc. you will need to attach the 50 oz weight to the flywheel as your stock balancer and internals will be balanced to that as well.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Sep 20, 2007
#5
  • Sep 20, 2007
  • #5
Stock rotating assy needs 50oz
 
D

dbarr

New Member
Jan 29, 2007
13
0
0
Sep 20, 2007
#6
  • Sep 20, 2007
  • #6
OK. but did you guys actually read my post? You answered only the easiest question of them all. I suppose if that's the only one you know then that's the only one you can answer. Can someone help me answer the rest of my questions.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Sep 20, 2007
#7
  • Sep 20, 2007
  • #7
The answer is on my screen(if you read between the lines). Use the 50oz weight. It will only bolt on in one place.You can't do it wrong. You dont need a machine shop 4 anything. Bolt it to the engine. Put clutch kit together on the clutch install tool.Put end of tool inside pilot bushing. Install bolts and torque to spec.
 
D

dbarr

New Member
Jan 29, 2007
13
0
0
Sep 20, 2007
#8
  • Sep 20, 2007
  • #8
I was supposed to get that from 2 lesbians making out?
 

Cobra912

Active Member
May 1, 2005
1,777
11
39
Wish I was anywhere but here
Sep 20, 2007
#9
  • Sep 20, 2007
  • #9
wow just my two cents but ya seem pretty snippy for someone lookin for help......I too am trying to figure out your second question....you don't need to take anything to the machine shop unless the flywheel is used, just like the previous posts say, bolt everything together and put it in. should work no problem.

I haven't posted a lot here but I have been on here quite a while so just a word of advice if you need help be polite as the guys and girls on here don't HAVE to help but want to help you.




 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
735
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
C
Drivetrain T-5 transmission issue
  • Ch3No2
  • Jul 11, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
493
Fox 5.0 Mustang Tech Jul 18, 2025
2000xp8
D
Foxbody Misfire 5.0 Swap
  • DPORTER0729
  • May 2, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
778
Fox 5.0 Mustang Tech Jul 13, 2025
90sickfox
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
888
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?