• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

FMS shorties

  • Thread starter Thread starter At1Maverick69
  • Start date Start date Sep 22, 2005

At1Maverick69

Member
Aug 21, 2004
220
0
16
San Leandro, Cali
Sep 22, 2005
#1
  • Sep 22, 2005
  • #1
sorry I searched but,no straight forward answer. I just got a deal of a lifetime for shorties ( I know, Long tubes rule..but Cali sucks) $23 from pick and Pull , but what do I use bolt them on? Do i use my old header bolts or the one that I took out with the headers tha thas smaller heads on them? or should I go with new stage 8 fasteners? ARPs'? thanks alot!!!
 
5

5PtSlo

New Member
Sep 22, 2005
10
0
0
Sep 22, 2005
#2
  • Sep 22, 2005
  • #2
Get new ones and use locktite.
 

88gt

Founding Member
Aug 2, 1999
794
0
0
Drillers cabin
Sep 22, 2005
#3
  • Sep 22, 2005
  • #3
New ones....Stage 8 prefered...loctite or a dab of Red High Temp RTV...
 

At1Maverick69

Member
Aug 21, 2004
220
0
16
San Leandro, Cali
Sep 22, 2005
#4
  • Sep 22, 2005
  • #4
soory, but where should I get them form? stage 8's I mean, thanks guys!!!!
 
5

5PtSlo

New Member
Sep 22, 2005
10
0
0
Sep 22, 2005
#5
  • Sep 22, 2005
  • #5
JEGS,SUMMIT,E-bay, search around
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Sep 22, 2005
#6
  • Sep 22, 2005
  • #6
Put a ruler across the flange -- if it's true and flat, you can probably save yourself some bucks and just use the small head bolts that came with them. I use small head ARP stainless on mine. I doubt you'll need locking header bolts if the flange is flat - I snugged mine after the first thermal cycle and haven't had to touch them since.
 

At1Maverick69

Member
Aug 21, 2004
220
0
16
San Leandro, Cali
Sep 22, 2005
#7
  • Sep 22, 2005
  • #7
Michael Yount said:
Put a ruler across the flange -- if it's true and flat, you can probably save yourself some bucks and just use the small head bolts that came with them. I use small head ARP stainless on mine. I doubt you'll need locking header bolts if the flange is flat - I snugged mine after the first thermal cycle and haven't had to touch them since.
Click to expand...
i just did that this afternoon and I could barely fit a 0.010" feeler gauge between the straight edge and the flange, that's good right?
 

At1Maverick69

Member
Aug 21, 2004
220
0
16
San Leandro, Cali
Sep 22, 2005
#8
  • Sep 22, 2005
  • #8
and oh BTW, how would you guys clean off the surface rust on these things? I had one done with a some light grit sandpaper, but couldn't get to some spots? would you paint it?? should I?
 
You must log in or register to reply here.

Similar threads

F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
484
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Most ridiculous / dishonest work you have heard a shop recommend?
  • SchwarzStock
  • Jul 19, 2026
  • Off-Topic Hangout
Replies
4
Views
143
Off-Topic Hangout Jul 20, 2026
SchwarzStock
Can makes noises when driving poping
  • Creomod
  • Oct 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
17
Views
802
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2025
Creomod
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
459
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?