FMS shorties

sorry I searched but,no straight forward answer. I just got a deal of a lifetime for shorties ( I know, Long tubes rule..but Cali sucks) $23 from pick and Pull :D , but what do I use bolt them on? Do i use my old header bolts or the one that I took out with the headers tha thas smaller heads on them? or should I go with new stage 8 fasteners? ARPs'? thanks alot!!!
 
Put a ruler across the flange -- if it's true and flat, you can probably save yourself some bucks and just use the small head bolts that came with them. I use small head ARP stainless on mine. I doubt you'll need locking header bolts if the flange is flat - I snugged mine after the first thermal cycle and haven't had to touch them since.
 
Michael Yount said:
Put a ruler across the flange -- if it's true and flat, you can probably save yourself some bucks and just use the small head bolts that came with them. I use small head ARP stainless on mine. I doubt you'll need locking header bolts if the flange is flat - I snugged mine after the first thermal cycle and haven't had to touch them since.
i just did that this afternoon and I could barely fit a 0.010" feeler gauge between the straight edge and the flange, that's good right?