Foglight help????

I have a 2000 GT, but I just had an 03/04 Cobra bumper and hood put on since I wrecked it. Anyways the new Cobra foglights won't match up to the GT foglight harness plugs-ins. Ford doesn't sell just the plug-ins. They said I had to buy the entire lighting harness. Outragious price, like 600 or 900 dollars, I can't remember exactly. Anyways I was wondering if anyone knows of a company that might sell the plug-ins or even the entire harness alot cheaper. Or could I possibly just hardwire the wires into the back of the foglights? I doubt any local junk yards are going to have a wrecked 03/04 Cobra laying around. Thanks in advance.

Green4.6GT said:

cut the 2 harnesses, splice them together, i installed quad fogs on my GT (same idea as the cdc kit they had on the mach 1) i just spliced them into the factory harness, so they all work off the factory fog switch.. its really really simple

-ryan

Click to expand...

The only harness I have is the one from the GT. There are no wires coming out of the Cobra Foglights. There is just a plastic female end that comes out of the back of the Cobra Foglights. Then there are the 2 male harness ends from my existing GT harness. One is on the passenger side and the other on the driver side. The male and female ends won't match up. I would just cut and splice but I am not seeing any loose wires coming from the Cobra foglights. So now what?

cool thanks. I also did a search and found out that there is a wire splice kit just for this setup. They are 20.12 a piece and you need to buy 2 of them. The part number is 1u2z14s411bca. I don't know why Ford wouldn't have said something about this? I guess I will check with them tomorrow on this and if they don't have it then I will splice them like you said. Thanks again.