Quick RunDown
Many pics to come, but at this time I dont have acess to all of them. Most of you here are familiar with the car. I can go into detail on specs etc thru PMs or phone calls.
Car has 67k on it
A4 Standard bore block included (just block) never been machined VIRGIN!
331ci stock block with 5300miles on it (just freshened up last summer)
Eagle rotating assym
8.5 c/r JE Pistons
4340 H-beam Rods
4340 Crank
TFS TW cylinder heads (306/220)
1.6 TFS stud mount roller rockers
Cam Motion custom cam (.542/.565 226/232 114)
Holley Sys Intake, lower port matched
Full Fuel System good for 900hp forced induction
Dual 255 inlines, -10 feed, -6 return, Aeromotive Regulator, Behind Bars Racecar Rails
60lb injs
Custom Turbo kit done by www.rtpaz.com (1500 miles on kit) Kit is Jet Hot Ceramic very easy plug acess
1 3/4 headers
2.5" X-over
3" Coldside
MP T70 .96 a/r
31x12x4 air to air intercooler good to 1300hp
Tial 44mm gate
Tial 50mm BOV
3.5" Downpipe
3" dynomax ultra flow mufflers
Kit has ports for N20 and methanol ready to go
AEM standalone, with elec boost controller, no MAF and no O2 sensors
AEM wideband
TKO600
Spec Stg 3+ modified (1000 miles)
Bogart D10s with MT DRs 275/50/15 (Wheels are brand new)
Saleen 18x8/18x10s also
AJE front tubular setup
MSD Dig 6
70mm Accufab TB
31 spline Strange Axles
04 Cobra Diff with carbnon fiber clutch packs
FMS 3.27 gears
Dbl adj Uppers with Solid rear end bushings
LCA (no name) with poly bushings
Eibach Drag springs rear with airbag
QA1 14/150 coilovers in front
D&D CC plates
Fluidyne radiator
etc etc
Car Ran 11.2@132 on 6-8psi on DRs (2.1 60') last week
Please only serious inq, this is a well put together car only needing the included block to become a real monster. This car is not a caged racecar, it is a street car. Body and paint in very good condition. It was repainted completely 4 years ago.
20k
I will put all the forged 331 parts in the A4 for the right price if you like
Many pics to come, but at this time I dont have acess to all of them. Most of you here are familiar with the car. I can go into detail on specs etc thru PMs or phone calls.
Car has 67k on it
A4 Standard bore block included (just block) never been machined VIRGIN!
331ci stock block with 5300miles on it (just freshened up last summer)
Eagle rotating assym
8.5 c/r JE Pistons
4340 H-beam Rods
4340 Crank
TFS TW cylinder heads (306/220)
1.6 TFS stud mount roller rockers
Cam Motion custom cam (.542/.565 226/232 114)
Holley Sys Intake, lower port matched
Full Fuel System good for 900hp forced induction
Dual 255 inlines, -10 feed, -6 return, Aeromotive Regulator, Behind Bars Racecar Rails
60lb injs
Custom Turbo kit done by www.rtpaz.com (1500 miles on kit) Kit is Jet Hot Ceramic very easy plug acess
1 3/4 headers
2.5" X-over
3" Coldside
MP T70 .96 a/r
31x12x4 air to air intercooler good to 1300hp
Tial 44mm gate
Tial 50mm BOV
3.5" Downpipe
3" dynomax ultra flow mufflers
Kit has ports for N20 and methanol ready to go
AEM standalone, with elec boost controller, no MAF and no O2 sensors
AEM wideband
TKO600
Spec Stg 3+ modified (1000 miles)
Bogart D10s with MT DRs 275/50/15 (Wheels are brand new)
Saleen 18x8/18x10s also
AJE front tubular setup
MSD Dig 6
70mm Accufab TB
31 spline Strange Axles
04 Cobra Diff with carbnon fiber clutch packs
FMS 3.27 gears
Dbl adj Uppers with Solid rear end bushings
LCA (no name) with poly bushings
Eibach Drag springs rear with airbag
QA1 14/150 coilovers in front
D&D CC plates
Fluidyne radiator
etc etc
Car Ran 11.2@132 on 6-8psi on DRs (2.1 60') last week
Please only serious inq, this is a well put together car only needing the included block to become a real monster. This car is not a caged racecar, it is a street car. Body and paint in very good condition. It was repainted completely 4 years ago.
20k
I will put all the forged 331 parts in the A4 for the right price if you like