• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Ford AOD questions

  • Thread starter Thread starter superhuaman
  • Start date Start date Aug 8, 2006
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Aug 8, 2006
#1
  • Aug 8, 2006
  • #1
Would it be ok to use this tranny with just a "frame-rail" tranny cooler, and not the cooler located in the radiator? How big a cooler would I need?

I don't have the original cooler lines since this is a 2.3>5.0 swap, and I don't want to have to find or make them.

Also, if I put this tranny in attached to the engine, how can i do it without help? I would have to put plywood or something on the ground so that the output shaft doesn't scrape
 
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Aug 8, 2006
#2
  • Aug 8, 2006
  • #2
ttt
 

pb_paulie_b

Founding Member
May 19, 2001
894
0
0
Chaptico, Maryland
Aug 8, 2006
#3
  • Aug 8, 2006
  • #3
I wouldn't advise using just a frame rail cooler. I'm worried it won't get enough airflow over it to do any good. I believe they are meant to be supplemental to the one in the radiator. Your way better off just running your own lines with 'transmission fluid hose'. Is your radiator for an automatic already? You might get by with just running your lines to a 28k cooler mounted up front if it's not.
As for throwing in the engine and tranny together, I actually like doing it like that. I always had my car on cinder blocks under all 4 tires. Don't forget to put on the e-break! It's possible to do it yourself with a cherry picker and a 'load leveler'. It's 10 times better to have someone there to guide it.
 
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Aug 8, 2006
#4
  • Aug 8, 2006
  • #4
Thanks...maybe you could come up and help
I have a load leveler but its from Harbor Freight so it's kind of crappy. I should be alright if I just lube up the screw I guess.

I don't have the car on cinderblocks, I just jacked it up maybe 4 or 5 inches on one side, so I could get under it and unhook the old tranny.
It sits pretty high with no drivetrain in it though...about 4-5 inches of tire to fender clearance, with 245/45/17's
 

pb_paulie_b

Founding Member
May 19, 2001
894
0
0
Chaptico, Maryland
Aug 8, 2006
#5
  • Aug 8, 2006
  • #5
Hey harbor Freight is good for stuff like that (not much else) I have that load leveler, and 2 engine stands from there ...PB
 
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Aug 8, 2006
#6
  • Aug 8, 2006
  • #6
I know.
I had the load leveler on my old engine/trans when I pulled them out on Sunday, and the screw was really hard to turn with any amount of weight on the unit. So I guess I'll have to spray it with something.
 
You must log in or register to reply here.

Similar threads

M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
B
Electrical V8 swap no power to anything
  • Bullittsmith
  • Sep 12, 2026
  • 1994 - 1995 Specific Tech
Replies
4
Views
304
1994 - 1995 Specific Tech Sep 15, 2026
Mcmahst
D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
421
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
607
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
575
Other Auto Tech Mar 3, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?