R302 block and rotating assembly minus cam. Block is 40 overbore. The 28 oz Crank is a CAT forged 3.25 stroke. Rods are Rpm h beam 5.4 inch. pistons are JE low comp. oil pan is a canton 8 quart with windage tray, pump pick up and oil pump included. Assembly was racing last 3 seasons and has approximately 200 passes. A rebuild prior to use is assumed. The crank snout is rough from a balancer cracking. I will throw in a 164 tooth, 28 0z flex plate {sfi current) if buyer wants it. 2000$ plus shipping. I will deliver it in portland, or area myself. Pan heater in pic is included. Engine had good oil pressure and ran well prior to tear down. Upgrading to a bigger displacement or i would not be selling this block. My location is Castle rock Washington. You can reply hear or call 9712194630