• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Ford Racings Radiator is Crap!!!

  • Thread starter Thread starter marine_2003
  • Start date Start date May 10, 2007

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
May 10, 2007
#1
  • May 10, 2007
  • #1
Ford Racings Radiator is Crap!!! Added Pic

I bought the Ford Racing Radiator M-8005-C I havent had it for a year yet and it has a damn hole in it. And they dont offer a warrenty on it. So now i need to get this one fixed and/or get another one.

View attachment 386324
 

TomCat

New Member
Apr 19, 2005
412
0
0
Utah
May 10, 2007
#2
  • May 10, 2007
  • #2
That sucks. Mine is an oversized one from Performance Radiator, a local radiator place... never had issues. Gay that they don't offer a warranty...
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
May 10, 2007
#3
  • May 10, 2007
  • #3
No warrenty means they know they built a piece of garbage......thats too bad to hear though
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
May 10, 2007
#4
  • May 10, 2007
  • #4
where is the hole? i am sure a hole just didnt appear, SOMETHING had to put it there seeing how for the last year it didnt have a hole.
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
May 10, 2007
#5
  • May 10, 2007
  • #5
Flavadave4 said:
No warrenty means they know they built a piece of garbage......thats too bad to hear though
Click to expand...


FRPP doesn't warranty any of their products since the are the "racing" parts division. Regular old Motorcraft stuff is warrantied but not the FRPP stuff.

That does suck about the radiator though. I have one from Northern Radiator. Nice full aluminum, all welded and a straight drop in. Even has the slots in the bottom lip for the fan shroud brackets.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 10, 2007
#6
  • May 10, 2007
  • #6
I have had my FRPP Rad for 6 years now and no issues with it. My engine runs cool. I have an issue with my black magic fan but thats a different story. I would not agree that the rads are crap. Where is the hole?
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
May 10, 2007
#7
  • May 10, 2007
  • #7
I would see if somebody can weld the hole up.....can't be that bad?
 

Fett

New Member
Nov 2, 2004
766
6
0
May 10, 2007
#8
  • May 10, 2007
  • #8
RYC CUKR said:
FRPP doesn't warranty any of their products since the are the "racing" parts division. Regular old Motorcraft stuff is warrantied but not the FRPP stuff.

That does suck about the radiator though. I have one from Northern Radiator. Nice full aluminum, all welded and a straight drop in. Even has the slots in the bottom lip for the fan shroud brackets.
Click to expand...

That always cracked me up....seeing as how most of the Ford Racing stuff is just repackaged parts that come with a warranty from the original manufacturer. The Ford Racing cap and rotor set and water pump...both Motorcraft items. They don't even repackage those, they just slap a Ford Racing sticker over the Motorcraft sticker. Pretty much everything Ford Racing sells is made by someone else, and if you were to buy it from the original manufacturer you would get a warranty and they would be cheaper. Thus, why I have NO Ford Racing parts on my car....and I work for a Ford Racing dealer.
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
May 11, 2007
#9
  • May 11, 2007
  • #9
Foxfan88 said:
where is the hole? i am sure a hole just didnt appear, SOMETHING had to put it there seeing how for the last year it didnt have a hole.
Click to expand...

The hole is in the middle of the radiator, I will get pictures and post them up today.
 

monte87

Founding Member
Feb 26, 2001
876
18
49
new york
May 11, 2007
#10
  • May 11, 2007
  • #10
DOnt feel to bad, oh and by the way-Welcome to my world, I have my 2nd FLUIDYNE that has a leak.
I'll give you some good advice-Definitely replace the lower rubber "INULATORS" when you replace the rad. They are $20 fom laurel Mustang, just some added insurance, esepcially after hearing the damper the rad from any severe potholes and crap, the original ones are most likely ancient being our cars are older.
I have to send my Fluidyne out to get repaired, until then-I just bought a Go dan 3 core copper brass GDI 433138 off rockauto for $151 time being.

Good luck-Ant
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
May 11, 2007
#11
  • May 11, 2007
  • #11
monte87 said:
DOnt feel to bad, oh and by the way-Welcome to my world, I have my 2nd FLUIDYNE that has a leak.
I'll give you some good advice-Definitely replace the lower rubber "INULATORS" when you replace the rad. They are $20 fom laurel Mustang, just some added insurance, esepcially after hearing the damper the rad from any severe potholes and crap, the original ones are most likely ancient being our cars are older.
I have to send my Fluidyne out to get repaired, until then-I just bought a Go dan 3 core copper brass GDI 433138 off rockauto for $151 time being.

Good luck-Ant
Click to expand...


Do you have a part number on the insulators? I cannot find them on the website.
Thanks
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
May 11, 2007
#12
  • May 11, 2007
  • #12
The lack of warranty is due to the 'intended use' of the parts. A 'Racing' part is assumed to suffer greater abuse than the same part on a street car.
How do you estimate the life of a part, when you don't know how severe the service life will be?


Out of curiousity...
What was your coolant mix for the last year?
tap/well water?




jason
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
May 11, 2007
#13
  • May 11, 2007
  • #13
vristang said:
The lack of warranty is due to the 'intended use' of the parts. A 'Racing' part is assumed to suffer greater abuse than the same part on a street car.
How do you estimate the life of a part, when you don't know how severe the service life will be?


Out of curiousity...
What was your coolant mix for the last year?
tap/well water?




jason
Click to expand...

I used the Prestone 50/50 coolant mix. I had bought the same radiator for my 85 which was a street/strip car ran straight water and it lasted the life of the car, 3 years i had it and then i sold it, and it is still running.
 

monte87

Founding Member
Feb 26, 2001
876
18
49
new york
May 11, 2007
#14
  • May 11, 2007
  • #14
marine_2003 said:
Do you have a part number on the insulators? I cannot find them on the website.
Thanks
Click to expand...

hey man-

i called 5.0 resto and they were out, then CJ Pony parts and they were out, and then finally laurel Mustangs-and they had them, but they are not listed on the website. They are Scott Drake rubber parts. Just call and ask them for the upper/lower radiator INSULATOR kit its $19.95. as a mtter of fact-just slapped them on and tonight-putting my new rad in-Im done with theis rad crap man!

Later Ant
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
May 11, 2007
#15
  • May 11, 2007
  • #15
monte87 said:
hey man-

i called 5.0 resto and they were out, then CJ Pony parts and they were out, and then finally laurel Mustangs-and they had them, but they are not listed on the website. They are Scott Drake rubber parts. Just call and ask them for the upper/lower radiator INSULATOR kit its $19.95. as a mtter of fact-just slapped them on and tonight-putting my new rad in-Im done with theis rad crap man!

Later Ant
Click to expand...

Thanks for the info.
 
B

bstrd86

New Member
Oct 17, 2003
44
0
0
DFW tx
May 11, 2007
#16
  • May 11, 2007
  • #16
You might try running a radiator cap with a sacrificial anode, that way the anode corrodes and not your radiator.
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
May 11, 2007
#17
  • May 11, 2007
  • #17
bstrd86 said:
You might try running a radiator cap with a sacrificial anode, that way the anode corrodes and not your radiator.
Click to expand...

Never heard of those, where can i get one?
 
You must log in or register to reply here.

Similar threads

5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
77
The Welcome Wagon Jul 3, 2026
5150K
5
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
133
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
252
Other Auto Tech Jul 13, 2026
General karthief
B
Saying Hi
  • BriansNSane
  • Dec 20, 2025
  • The Welcome Wagon
Replies
5
Views
290
The Welcome Wagon Dec 21, 2025
BriansNSane
B
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
503
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?