Ford's new 6.2 in a stang?

thomas91169 · Sep 30, 2007

DBMSTNG said:
you do realize Ford already has a 3.5L V6 that makes 263hp on 87 octane, right?

in what?

my original thought still stands.

ford had something going with the 5.0 and at our finest hour it was killed for the 4.6L. We have finally made great strides (took us long enough) with the modular and they want to yet again kill it for something else? makes me angry and confused. IMO if it aint broke dont fix it, there is nothing wrong with the current powerplants, they just need a little help and theyre jumping on the big boys and the big boys are going "man we didnt sign up for this ****!"

Stangdriver13 · Sep 30, 2007

thomas91169 said:
in what?

my original thought still stands.

ford had something going with the 5.0 and at our finest hour it was killed for the 4.6L. We have finally made great strides (took us long enough) with the modular and they want to yet again kill it for something else? makes me angry and confused. IMO if it aint broke dont fix it, there is nothing wrong with the current powerplants, they just need a little help and theyre jumping on the big boys and the big boys are going "man we didnt sign up for this ****!"

Did u not read the previous post, the new motor will be like the modulars now just with more bore, were not really destroying our existinging power plant just improving upon it. Seriousiouly if a 4.6 mod can run with a 5. 7 pushrod, a all new 6.2 should destroy current pushrods. BTW the engine is broke, it is consistently outperformed by every other truck industry out there. So Ford must do something

jivepepper · Sep 30, 2007

This thread requires entirely to much reading. I don't care that much.

bdcardinal · Sep 30, 2007

thomas91169 said:
in what?

the motor is used in teh five hundred and the mazda cx-9. mazda also has a 3.7L version in the 08 cx-9 with 270hp.

04YELLOWGT · Sep 30, 2007

its also in the MKZ.

Wolvrin704 · Sep 30, 2007

Don Bowles may be running one in his NMRA car. In the Nov issue of MM&FF they show his car and the "experimental" 7.0L engine he has that is supposed to be for trucks and Mustangs in the near future. Since the rumors thus far say the 6.2 can be bored out to 7.0 I believe we have an actual running version of the upcoming motor. Currently its in the 800 hp range and he's running low 9's.

I'm thinking though that this motor will probably be only in Cobra's, not GT's and it will be the 5.7 or 5.8 version whichever it is, not the 6.2 which will be for the truck. Still, the possibilities make one drool.

XtorT'r · Oct 1, 2007

I have the mm&ff issue but where is everyone else getting this info from, I googled it and this thread was the best link

Stangdriver13 · Oct 1, 2007

i have found most of my info from either forums on blueovalforums.com, few ppl work for ford in there and give away some info, otherwise the wikipedia has some info on it. None of this is confirmed by ford however, but is above rumor status, is the way i would put it. Google, 6.2 boss engine or ford 6.2 engine and you might get some better results.

justinschmidt1 · Oct 1, 2007

http://autospeed.com/cms/A_1613/article.html?popularArticle

Have you guys heard of the Ford xr6 ?. its only made in australia I think...makes 240 kw or 320 hp and 450nm..which is a lot of torque I guess....

its inline 6 turbo stock. Stock psi is set at 6 ...but adding hp to a already stock turbo car is easy. Exhaust, boost controller, better intake and before you know it your over 400 hp.

if only they made it in the us

I think it would be cool if they put it into a car in the us...maybe a new design...would be sweet if they put it into a stang..but that will probably never happen

justinschmidt1 · Oct 1, 2007

justinschmidt1 said:
http://autospeed.com/cms/A_1613/article.html?popularArticle

Have you guys heard of the Ford xr6 ?. its only made in australia I think...makes 240 kw or 320 hp and 450nm..which is a lot of torque I guess....

its inline 6 turbo stock. Stock psi is set at 6 ...but adding hp to a already stock turbo car is easy. Exhaust, boost controller, better intake and before you know it your over 400 hp.

if only they made it in the us

look at this one on dragtimes. Basically ecu reflash and exhaust work and he ran a 12.8 car has serious potential

tiptone · Oct 1, 2007

Ford doesn't generally have a habit of debuting new engines in the Mustang. Not saying it'll never happen, but I would expect it in something else for a few years before the Mustang.

Wolvrin704 · Oct 1, 2007

tiptone said:
Ford doesn't generally have a habit of debuting new engines in the Mustang. Not saying it'll never happen, but I would expect it in something else for a few years before the Mustang.

Thats why its going in the F150 one year before the Mustang.

Wolvrin704 · Oct 1, 2007

Stangdriver13 said:
i have found most of my info from either forums on blueovalforums.com, few ppl work for ford in there and give away some info, otherwise the wikipedia has some info on it. None of this is confirmed by ford however, but is above rumor status, is the way i would put it. Google, 6.2 boss engine or ford 6.2 engine and you might get some better results.

Those have been my major sources as well. Its no secret this motor was killed in 2005 but the new regime has resurrected it.

Stangdriver13 · Oct 1, 2007

It was resurrected because ford finally realized that the 5.4 no longer cuts it in todays increasing hp market for both trucks and with the new charger and camaro to have around 400hp, the 4.6 in the stang isn't going to cut it much longer either.

StangYellow · Oct 2, 2007

thomas91169 said:
in what?

my original thought still stands.

ford had something going with the 5.0 and at our finest hour it was killed for the 4.6L.

We have finally made great strides (took us long enough) with the modular and they want to yet again kill it for something else?

The 5.0 was rated at 225 hp for a decade... yeah, they really had something going with that one.

If these rumors are true, the 4.6L will be replaced with a bigger displacement engine. More displacement = potential for more power.

:Zip2:

tiptone · Oct 2, 2007

Wolvrin704 said:
Thats why its going in the F150 one year before the Mustang.

Again, not saying it couldn't happen, but I would be surprised to see them only have it on the street for a year before seeing it in the Mustang. I think it would be great if they would prove me wrong.

hotmustang331 · Oct 2, 2007

^3V motor was in the 04 trucks and then in the 05 stang right? Introduced 1 year before the mustang right?

tiptone · Oct 2, 2007

hotmustang331 said:
^3V motor was in the 04 trucks and then in the 05 stang right? Introduced 1 year before the mustang right?

Seems like that's just a progression of the same engine where the 6.2 would be a brand new engine, block and all. Again, would love for them to prove me wrong, matter of fact, I dare them.

DropTopPony · Oct 2, 2007

More bore is all i ever asked for...well and less weight but i'll be happy with a 5.8 modular with a 4.0+ bore for sure. That would make me want to buy a new Mustang.

bdcardinal · Oct 2, 2007

hotmustang331 said:
^3V motor was in the 04 trucks and then in the 05 stang right? Introduced 1 year before the mustang right?

it was also used in australia since i think 02 or 03.

Ford's new 6.2 in a stang?

thomas91169

I'd donkey punch my sister.

Stangdriver13

Member

jivepepper

bdcardinal

tree hugger

04YELLOWGT

Active Member

Wolvrin704

Member

XtorT'r

New Member

Stangdriver13

Member

justinschmidt1

Member

justinschmidt1

Member

tiptone

Member

Wolvrin704

Member

Wolvrin704

Member

Stangdriver13

Member

StangYellow

tiptone

Member

hotmustang331

Active Member

tiptone

Member

DropTopPony

Noob Slayer

bdcardinal

tree hugger

Similar threads

Ford's new 6.2 in a stang?

I'd donkey punch my sister.

Member

tree hugger

Active Member

Member

New Member

Member

Member

Member

Member

Member

Member

Member

Member

Active Member

Member

Noob Slayer

tree hugger

Similar threads

Privacy & Transparency

Privacy & Transparency