• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Paint and Body Fox Body Painting 101

  • Thread starter Thread starter Davedacarpainter
  • Start date Start date Mar 24, 2016
Prev
  • 1
  • …
  • 33
  • 34
  • 35
  • 36
  • 37
  • …
  • 48
Next
First Prev 35 of 48 Next Last

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Oct 30, 2017
#681
  • Oct 30, 2017
  • #681
Chuckman said:
Machinist
Click to expand...
That’s right, yeah, a little more precise measurements there!
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,926
10,572
203
polk county florida
Oct 30, 2017
#682
  • Oct 30, 2017
  • #682
Body man pulling frame: 1/4 inch, we are good to go!
Machinist: 1/4 inch? I can fix that!
 

02 281 GT

Agreed...My wife has great Boobs
15 Year Member
Feb 3, 2009
3,208
1,972
194
Cabot, AR
Oct 30, 2017
#683
  • Oct 30, 2017
  • #683
I'm actually still fuzzy on how that frame machine works. Maybe it's the picture, but I couldn't see the measuring arm you were talking about. Sounds pretty straightforward, though.
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Oct 30, 2017
#684
  • Oct 30, 2017
  • #684
02 281 GT said:
I'm actually still fuzzy on how that frame machine works. Maybe it's the picture, but I couldn't see the measuring arm you were talking about. Sounds pretty straightforward, though.
Click to expand...
Yeah, all you see is the rail it runs on. I’ll get a picture and post it today.
 
Reactions: 02 281 GT

02 281 GT

Agreed...My wife has great Boobs
15 Year Member
Feb 3, 2009
3,208
1,972
194
Cabot, AR
Oct 30, 2017
#685
  • Oct 30, 2017
  • #685
Davedacarpainter said:
Yeah, all you see is the rail it runs on. I’ll get a picture and post it today.
Click to expand...

I really appreciate you taking the time to explain all that just to satisfy my curiosity.
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Oct 30, 2017
#686
  • Oct 30, 2017
  • #686
Ok, here’s a different view of the rails the measuring sled rides on.

This is the sled put up. The arm articulates in all directions and a different tip is put on the measuring arm depending on the point you’re measuring to.
 
Reactions: 90sickfox and 02 281 GT

droopie85gt

Hookers and Beer for life!
5 Year Member
Dec 26, 2016
1,028
818
153
Cordova, TN
Oct 30, 2017
#687
  • Oct 30, 2017
  • #687
That's badass! How much did that bad boy cost?
 
Reactions: bird_dog0347

bird_dog0347

still married haven't seen testicles in years
15 Year Member
Jun 7, 2012
2,301
2,034
174
Little Elm, TX
Oct 30, 2017
#688
  • Oct 30, 2017
  • #688
droopie85gt said:
That's badass! How much did that bad boy cost?
Click to expand...
 

Attachments

  • ziqBONA.webp
    11.4 KB · Views: 278
Reactions: Davedacarpainter

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Oct 30, 2017
#689
  • Oct 30, 2017
  • #689
Honestly, I'm not sure. I'll find out tomorrow and let y'all know.
 

droopie85gt

Hookers and Beer for life!
5 Year Member
Dec 26, 2016
1,028
818
153
Cordova, TN
Oct 31, 2017
#690
  • Oct 31, 2017
  • #690
I'll go with $83,995.
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Oct 31, 2017
#691
  • Oct 31, 2017
  • #691
droopie85gt said:
I'll go with $83,995.
Click to expand...
I didn't check today. It was crazy. End of the month and the estimators want all their vehicles done.

$84k is probably a little high. Buying new, the bigger frame machines run in the mid $30k-$40k area. I can't imagine the whiz bang electronics cost more than maybe $20k.

I really will find out tomorrow.
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,926
10,572
203
polk county florida
Oct 31, 2017
#692
  • Oct 31, 2017
  • #692
I bid 35k
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Nov 1, 2017
#693
  • Nov 1, 2017
  • #693
John Dirks Jr said:
My 93 convertible body feels very wiggly. Like it's twisting about mid point. Mostly at speeds between 20 and 40 mph. At highway speeds I dont really feel it. I need to get the rear tires balanced before I conclude there's something bigger wrong. If tire balancing doesn't fix it I might be taking it to a local who's very familiar with these cars. This car has sub frame connectors but only on the back half of the uni-body. My 92 hatch feels solid compared to this convertible. Maybe I need full length sub frames on this vert too.

Meanwhile, where on this convertible underside should I look for signs of stress? What typically might I find?
Click to expand...

Check where the transmission tunnel meets the rear seat sheet metal, the firewall corners where they meet the front frame structure, the lower bends if the a pillars at the door openings, and seat mounting points.

My convertible actually had cracks inside the corner of the cowl on the passenger side. It was only viewable from looking above the globe box, between the heater box and the computer area with a scope.

My convertible had a 10 point cage and subframe connectors. I did yank on it occasionally.... in to the mid 10s. Most of the time it lived on street tires and spun more than hooked.

I remember feeling like the car was crawling over speed bumps. Got to the point where I really felt unsafe. Had no idea so many issues lurked around that car. Had to scrap it. Better to know now before it gets too bad.
 
Reactions: JD1964, a91what, Davedacarpainter and 1 other person

02 281 GT

Agreed...My wife has great Boobs
15 Year Member
Feb 3, 2009
3,208
1,972
194
Cabot, AR
Nov 2, 2017
#694
  • Nov 2, 2017
  • #694
karthief said:
I bid 35k
Click to expand...

$35,001!
 
Reactions: RaggedGT

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,926
10,572
203
polk county florida
Nov 2, 2017
#695
  • Nov 2, 2017
  • #695
Damn, $35051
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Nov 2, 2017
#696
  • Nov 2, 2017
  • #696
Our measurement system costs over $30k. I was off a little bit.
 
Reactions: 90sickfox

JoeDaddy

Honey, I need a check for $30k to pay the hooker
10 Year Member
Apr 20, 2010
760
647
144
SW Michigan
Nov 15, 2017
#697
  • Nov 15, 2017
  • #697
@Davedacarpainter , not foxbody related, but.... looking at suburbans..
How worried should I be if there is signs of rust bubbles? How would I make them smooth? My plan is to wrap the suburban the same blue color as I did my fox.

Sandblast / ??? , then something like por15, then bondo to smooth?
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,441
1,526
194
Maryland
Nov 15, 2017
#698
  • Nov 15, 2017
  • #698
Look underneath at the brake lines too. Those Chevy trucks and suv’s are notorious for brake line corrosion. If you’re not able to fix them yourself, it can be expensive to have it done professionally.
 
Reactions: JoeDaddy

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Nov 15, 2017
#699
  • Nov 15, 2017
  • #699
JoeDaddy said:
@Davedacarpainter , not foxbody related, but.... looking at suburbans..
How worried should I be if there is signs of rust bubbles? How would I make them smooth? My plan is to wrap the suburban the same blue color as I did my fox.

Sandblast / ??? , then something like por15, then bondo to smooth?
Click to expand...
Those are pretty nasty looking, you’ll want to strip the paint off the lower section and address the rust issue. First you need to see how bad it is. You’ll definitely want to do this before wrapping it.
 
Reactions: JoeDaddy

droopie85gt

Hookers and Beer for life!
5 Year Member
Dec 26, 2016
1,028
818
153
Cordova, TN
Nov 18, 2017
#700
  • Nov 18, 2017
  • #700
Oh the rust belt. So, if the paint is bubbling from rust, what does the frame look like? I usually hate Memphis for most things (CRIME) but good Lord above thank you for no road salt EVER. If you see a rusted out POS around here, it either came from the North or the coast.
 
Prev
  • 1
  • …
  • 33
  • 34
  • 35
  • 36
  • 37
  • …
  • 48
Next
First Prev 35 of 48 Next Last
You must log in or register to reply here.

Similar threads

F
Need body/paint shop in san jose area
  • FordFan
  • Nov 13, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
6
Views
668
1965 - 1973 Classic Mustangs -General/Talk- Nov 21, 2025
Noobz347
B
Take a look at my rack!
  • bicknell
  • Sep 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
683
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2025
Willybill32
B
Purchasing 1st Fox, need advice
  • Blown02svt
  • May 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
manicmechanic007
  • Sticky
Free Beta Access: Tool I Built to Hunt Fox Bodies Faster
  • MRaburn
  • Mar 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
496
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 7, 2026
FastDriver
R
Rcapri - 1980 Capri, bought new by inlaws
  • RCapri
  • Sep 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
904
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 20, 2025
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?