fox TB conversion problems

I know I had to elongate mine to get the throttle to sweep correctly. I opened the holes some and also used some 1/4 thick washers to push the bracket out some as it was binding. I scammed my cable from a salvage yard outta a Fox.

I take it its sweeping cleanly with no bind?? does it appear to be straight as it connects to the TB??

I take it your not getting full volts at WOT on the TPS??




the elongation in the bracket...top pic... allows you to "pull" the cable back...more throttle...this pic in using the non-elongated bracket...Make sense??



Here's the 1/4" spacers I used to shim mine out...otherwise the sweep was all fubar... the elogation and these made it go to full throttle and sweep nice..

It's never that easy.... Always a pay-off...you wanna play you gotta pay. A rotary file makes the easy work of the bracket...Hit up a hardware store for some washers...

Take a break.. I'm having a few Magarita's and then heading out to put a lift kit in my truck..."supposed" to be a easy lift...I'm not buying it...

Andy, you know it'll be an easy lift. You'll just use the lift in your garage to raise the truck off the suspension and swap new parts in. Did I mention that I want your garage?

Its not getting the shocks/springs out...thats gravy on this truck...Its using the freakin spring compressors I hate...always waiting for the thing to explode when your at max compesssion...

Your welcome to my garage whenever your in town...

I wanna do this "someday" So Im subscribing b/c I like these pics!!

RC