Tried doing a search just got alot of junk. I need to get to the bottom of it. Anyone know what i need to eliminate the EGR Adapter?? All i heard was the Throttle Cable, is that true? How hard is it to Install a foxbody one.
FoxBody Conversion for intake.??
- Thread starter FordStang
- Start date
94TURBO5 O
New Member
1105
I AM the random post master...bow down
you mean switch over to a fox tb? You mentioned the EGR and TB cables which dont really have anything to do with one another. To switch to a fox TB you'll need the bracket and cables from a fox stang.
When i said EGR adapter i meant The (Elbow). What is different from the foxbody t/b and the 94-95's? Im think prob the way how the cable mounts maybe? Because the elbow peice held our EGR and our throttle cable. Where can i find a nice brand new 65mm FMS t/b for my car?
Lostcause
Member
VIPERn94Five-0
Founding Member
Jake, how do you go about doing it with a 94-95 TB??....id be interested in doing this since id rather not buy another throttle body after dropping $250 on an FMS for our cars last summer....GTJake said:
Anthony
stang_gt_1994
Founding Member
Pretty easy to do. I got a accufab TB spacer (blank) with the cable bracket flange. I also got a throttle cable and bracket off of ebay, a TPS sensor at a junkyard, and a 5/8 cap at ace hardware for the egr header bung. I also just put a Anderson power pipe for a 86-93 stang on to. It looks pretty cool and most of all it looks really clean looking under the hood.
GTJake
Founding Member
Anthony, don't know. Haven't done it yet, but I plan on using a fox TB. Somewhere in this thread a guy did it with a 94-95 TB:http://www.corral.net/forums/showthread.php?s=&threadid=427228&perpage=35&pagenumber=3
Mark, do you have any pics of it with the 94-95 IAC? I was wondering how that would look compared to the fox IAC.
Jake
Mark, do you have any pics of it with the 94-95 IAC? I was wondering how that would look compared to the fox IAC.
Jake
stang_gt_1994
Founding Member
Like before pictures of my car? Sorry I havent been to stangnet in a while. BTW what does IAC mean?
GTJake
Founding Member
IAC= Idle Air Control
It's black on 94-95's and that silver tube that bolts to the TB on foxes. I thought I remember you using a 94-95 IAC instead of the fox one when you did your swap. Just wondering if you have any close up pics to see what it looks like compared to the fox IAC.
Jake
It's black on 94-95's and that silver tube that bolts to the TB on foxes. I thought I remember you using a 94-95 IAC instead of the fox one when you did your swap. Just wondering if you have any close up pics to see what it looks like compared to the fox IAC.
Jake
stang_gt_1994
Founding Member
Similar threads
