Fox Foxbody quarter window

TOOLOW91

If you're the village idiot what's that make me?
15 Year Member
Nov 29, 1999
7,296
7,098
234
S.I.NY
If demand is that high they should up the price. If the final product is that good, their service is worth more that $230ish.

Upping the price would slow demand. Then they could at least find a good balance and not have a massive backlog.

I can see why it takes so long. 10-15 coats with up to 3 days of drying time each? Wow


Regardless, I have a $50 pair of used quarters I could send in that I won't miss for a while , or try to do them myself, or buy the LRS repros for $330. What to do?

My originals are terrible. I need to do something.
I just Bought a set team vizions did. They look almost NOS honestly. My buddy whos local to me had a set done by them and fox mustang restoration who re bonds the glass completely . Hes only doing coupes so team vizions is your only option. I know he had issues with time frames. I got them second hand though my buddy waited a few months
 
  • Sponsors(?)


John Dirks Jr

5 Year Member
Jun 28, 2013
2,765
1,162
174
56
Maryland
And to think I saw these a few weeks ago and yes, both quarter windows were good and looked original. Probably could have had them both for under $100. Damn!!!
2069A7BD-7BE7-42D6-A205-0D1F507A10D1.jpeg
 
  • Like
Reactions: HotFox

BlakeusMaximus

Still got to try a little lube on my speedo head
Jul 12, 2017
1,963
1,105
153
What is the procedure for removing the quarter windows?
You have to remove the inner trim panels from inside the car to access the bolts. They bolt in, but are sealed with butyl tape. You pretty much have to unbolt the glasses and slowly work the butyl tape loose.
 
  • Like
Reactions: John Dirks Jr

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
32,846
9,000
224
Massachusetts
I find the best way to do it is have a helper (or wife) simple push the glass out with both hands why you begin prying at the door jamb. Once you get it started, slowly work it away from the body carefully. They like to break right down at the point near the Mustang lettering
 

Mustang5L5

i'm familiar with penetration
Mod Dude
Feb 18, 2001
32,846
9,000
224
Massachusetts
And then you'd probably have to sell a lot of windows at a higher price to recoup the licensing fees.

Bad enough they are $300/pair now.

I'd just buy the decals
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/173663711254

I bought a set of decals just to see. For $9 you get four of them in any color of your choosing.

Pretty spot on.

IMG_3004.JPG


I may try the LRS windows. I want to refinish the set I have now, but after inspecting them there are a few flaws I think would irk me. Plus the lead time is a killer. I'd rather just go new.

I've seen some pics of th LRS windows on cars and they seem to fit nice and tight. I just never liked how they didn't say Mustang.


No...I'm not buying NOS.
 

BlakeusMaximus

Still got to try a little lube on my speedo head
Jul 12, 2017
1,963
1,105
153
I bought a set of decals just to see. For $9 you get four of them in any color of your choosing.

Pretty spot on.

IMG_3004.JPG


I may try the LRS windows. I want to refinish the set I have now, but after inspecting them there are a few flaws I think would irk me. Plus the lead time is a killer. I'd rather just go new.

I've seen some pics of th LRS windows on cars and they seem to fit nice and tight. I just never liked how they didn't say Mustang.


No...I'm not buying NOS.
I'm with you. I've seen the stickers, you really cant tell they are sticker until your a few feet away.
 

Jersey Joe

I remember blowing that Monkey's ass
10 Year Member
Nov 29, 1999
653
1,046
154
52
Bloomingdale N.j.
What is the procedure for removing the quarter windows?
I've found with a heat gun they come out much easier, years ago I used to do vinyl tops and popping out quarter windows was a weekly occurrence. We would heat up the buytl and then we used to lay on the back seat and push the window out with our foot while a assistant would hold onto it on the outside.
 
Thread starter Similar threads Forum Replies Date
F Fox Place To Buy Quarter Window Weather Strip 1990 Foxbody 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
88LXCoupe09 Expired Notch Quarter Window Interior Exterior Parts 0
E Best tires for 88 Foxbody GT? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
K Is my foxbody cammed? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 11
White85fox New from Idaho The Welcome Wagon 3
Foxslider SOLD WTB: 87-93 stock foxbody axle out of 8.8. Drivetrain Parts 0
M 93 foxbody 347 stroker megasquirt 2 pnp initial timing set up?? advice Digital Self-tuning Forum 6
S Fuel Explorer Throttle Body.....What Years Will Work On Foxbody Fox 5.0 Mustang Tech 5
12Pack WTB/Trade Wtb foxbody, FL Fox Body Mustangs For Sale (1979-93) 0
S Motor Mounts 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
S Old Foxbody owner looking to own again. The Welcome Wagon 4
K What's it Worth? 87 Fox GT What is it Worth?!?!? 11
T Exhaust Replacing cats with O/R x pipe and need a tuner Fox 5.0 Mustang Tech 6
mustangmccance Foxbody owner from Iowa The Welcome Wagon 14
T Aod transmission issues Fox 5.0 Mustang Tech 1
T Aod shifter linkage 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
N 86 foxbody Fox 5.0 Mustang Tech 1
Foxslider Foxbody junkyard direct replacement axles 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 41
T Drivetrain Is it worth it to rebuild an aod transmission or get something else? Fox 5.0 Mustang Tech 18
T Engine Foxbody idling surging and stalling Fox 5.0 Mustang Tech 10
K Engine 89 mustang lx 2.3 Starting problems 2.3L (N/A & Turbo) Tech 8
P Fox Has anyone ever used sn95 emission valve solenoids in a foxbody. 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
F Rancho GT-III, Foxbody Mustang Swaybar Parts 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
5 NEED ADVICE FROM COMMUNITY MEMBERS 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 8
T Heater Core fix 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 21
B Drivetrain Foxbody Rear End Maxed Out Fox 5.0 Mustang Tech 38
5 3.55 gears for a 87 mustang automatic transmission 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
I 1988 Mustang possible transmission shuddle? Fox 5.0 Mustang Tech 4
8 Engine Turbo fox build hot start issue Fox 5.0 Mustang Tech 7
beyondEOD SOLD MOATES QUARTERHORSE QH EEC Tuner Engine and Power Adder 1
1989LXFOX Engine 2G Alternator Install Wiring Help Fox 5.0 Mustang Tech 3
8 Plz Help! ‘88 Mustang will not idle and runs poorly Fox 5.0 Mustang Tech 4
Serb Progress Thread First Foxbody 408 Stroker 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
E WTB/Trade WANT TO BUY: ALMOND FOXBODY Fox Body Mustangs For Sale (1979-93) 0
9 Need held, Strange Sound at Ignition Fox 5.0 Mustang Tech 2
C Rovos Durban 18x10.5 on foxbody 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
A Foxbody misfire Fox 5.0 Mustang Tech 14
K Electrical Can someone tell me what these connector is for on 91lx ecu harness Fox 5.0 Mustang Tech 1
R 4v foxbody 1996 - 2004 SN95 Mustang -General/Talk- 3
Z Engine 88 foxbody not running Fox 5.0 Mustang Tech 4
Mstng93SSP Is the foxbody used part market dead? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 69
JDSpeed Mid-engine, AWD, foxbody with Ferrari chassis 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 14
Q Foxbody 5.4 4V Build Thread 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
A Suspension Foxbody sitting lower in the back. Fox 5.0 Mustang Tech 4
S 1989 Foxbody Project - For Sale Fox Body Mustangs For Sale (1979-93) 0
Infoxicated5.0 Foxbody lean. Please help 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 12
I Electrical Hi all! New here! Hoping to get a little help with a problem i am having on my 93 Foxbody! Fox 5.0 Mustang Tech 16
Z Foxbody engine shakes at idle only Fox 5.0 Mustang Tech 10
J Where to place jackstands on foxbody with subframe connectors 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 15
D Whats the best intake for me? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
Similar threads