- Apr 15, 2023
- 2
- 0
- 1
I took the rear end out of a 95 GT donor car and converted my foxbody to 5 lug and all disk brakes. Rear end is completely rebuilt with Sn95 ( fox length) moser axels. I cut and switched the caliper brackets like other forums recommended. Everything went back together great except the new rear brake calipers. The calipers seem to be pulling the back of the rotors inward causing the fronts to push out and coming off the flange. This is causing it to bind and not roll easily after the wheels are torqued down.
Did anyone shim the caliper brackets out with a washer to get the alignment that’s needed?
Did anyone shim the caliper brackets out with a washer to get the alignment that’s needed?