Moderators, if there is an issue with this post please let me know.
I figured I'd drop a post here as I'd rather help out a fellow Stangnet or Modular Fords member than just anyone.
This post is for 04 Cobra owners only, not 03's with an 04 flash.
I am in need of an 04 Cobra with a 2.8 upper pulley, air filter and catback exhaust. (Box code AMZ1 or AMZ2)
If you do not already own the pulley, you may buy it with the proper belt and idler(s) and I will PAY for the installation and give you a FREE dyno tune with dyno charts and all recorded data.
You will have a choice of a free chip, programmer or flash.
You must be in Florida and must be able to provide me with your vehicle for one day this week or early next week. If it currently does not have a pulley, I will need it for two days and you will get it back with the pulley and tuning installed.
Just to cover the requirements again:
Vehicle must be:
2004 Cobra
-2.8 upper pulley
-some type of cold air intake or K&N type cone filter
-catback exhaust
You will receive:
-Free dyno tune
-Free product
-Free install of pulley, belts, idlers in the evet your pulley is not currently
installed.
-dyno sheets with complete data
I will also make stock vs modified dyno results with comparisons if I receive your car with the stock pulley on it.
If you would like to make your vehicle available for this, please send me a PM.
I can not stress enough that this is for 04 cobra ONLY.
More specific information will be available through PM only.
thanks =o)
I figured I'd drop a post here as I'd rather help out a fellow Stangnet or Modular Fords member than just anyone.
This post is for 04 Cobra owners only, not 03's with an 04 flash.
I am in need of an 04 Cobra with a 2.8 upper pulley, air filter and catback exhaust. (Box code AMZ1 or AMZ2)
If you do not already own the pulley, you may buy it with the proper belt and idler(s) and I will PAY for the installation and give you a FREE dyno tune with dyno charts and all recorded data.
You will have a choice of a free chip, programmer or flash.
You must be in Florida and must be able to provide me with your vehicle for one day this week or early next week. If it currently does not have a pulley, I will need it for two days and you will get it back with the pulley and tuning installed.
Just to cover the requirements again:
Vehicle must be:
2004 Cobra
-2.8 upper pulley
-some type of cold air intake or K&N type cone filter
-catback exhaust
You will receive:
-Free dyno tune
-Free product
-Free install of pulley, belts, idlers in the evet your pulley is not currently
installed.
-dyno sheets with complete data
I will also make stock vs modified dyno results with comparisons if I receive your car with the stock pulley on it.
If you would like to make your vehicle available for this, please send me a PM.
I can not stress enough that this is for 04 cobra ONLY.
More specific information will be available through PM only.
thanks =o)