• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fresh AOD...have PROBLEMS, CAN ANYONE HELP!?!

  • Thread starter Thread starter montegoman351
  • Start date Start date Apr 24, 2007

montegoman351

Member
Jan 12, 2007
169
1
18
Apr 24, 2007
#1
  • Apr 24, 2007
  • #1
Well, just got finished with my Wide Ratio AOD install on my '73 Montego. Set the TV to 35psi with the spacer tool and 0psi at idle. Went for the first test drive yesterday and it didn't want to shift right, on the way back home it started shifting okay. Just thought it was a fluke, went for a second test drive when it was cold tonight and it shifted right for a while, then the PROBLEMS started.

Under all throttle positions, it shifted right and on time. 1-2 at ~18mph, 2-3 at ~31mph, and 3-4 at ~51mph. Passing gear kickdown was right on the money.

Now to the problems: 1-2 at ~20mph, 2-3 at ~40mph, and 3-4 at ~51mph. Under light throttle I can feel the TC slipping, and under medium accel and passing gear, the TC slips so badly it makes the car backfire.

Ok, limped home, let the headers, and fluid cool. Rechecked the TV pressure, 10psi with the spacer tool, only 30psi with the cable pulled ALL the way OUT. Before, it was 85-90psi, but not now. If I rev the engine I can get the tv pressure to rise to normal, with the cable pulled all the way out.

What am I looking at here? Valve body? I would think someone here has had this problem before.

Please, any help would be appreciated, Chris.
 
S

superhuaman

New Member
Nov 8, 2004
907
0
0
Harrisburg, PA
Apr 24, 2007
#2
  • Apr 24, 2007
  • #2
shouldnt be 0psi at idle...
 
K

krallman

New Member
Mar 3, 2006
96
0
0
Hurricane, WV
Apr 25, 2007
#3
  • Apr 25, 2007
  • #3
the aod is hard to set up correctly. Its not like a c-4 where you can almost throw it in and go. I would say there is a problem with the tv cable. If you not 100% sure in your work i would take it to a tranny shop and let them adjust everything. Its not worth burning up your new aod and it doesnt take long.
 

montegoman351

Member
Jan 12, 2007
169
1
18
Apr 25, 2007
#4
  • Apr 25, 2007
  • #4
The spec in the Ford manual says 0-5psi, on the internet, and the trans tech at work all said 0-5psi at idle.

Oh and the cable works fine, I'm thinking the VB is leaking internally, or the TV plunger is sticking.
 
You must log in or register to reply here.

Similar threads

Aod to t5 swap will it live?
  • 87slow.0
  • Nov 5, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
471
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 5, 2024
87slow.0
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
847
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
S
what would you do? sell the project and buy completed or finish project?
  • STANG32
  • Feb 8, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
580
1965 - 1973 Classic Mustangs -General/Talk- Feb 16, 2025
rusty428cj
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?