fresh pics - first timer

Stark77

Member
Jun 11, 2008
501
0
16
Tallahassee, FL
I've been posting here for a while but haven't ever posted any major pics of the car - just small pics of projects etc. Got some O.K. pictures this morning and a nice video of the car starting up and idling in neutral and drive.
31118120017_large.jpg

31118120015_large.jpg
31118120016_large.jpg
31118120018_large.jpg
show_image.pl

show_image.pl

3111812_5_full.jpg

3111812_10_full.jpg
 
There ya go... Looks good man. Many cool little exterior touches:nice: I love yellow. i'll bet the N2O is a blast:D I'm really about to pull the trigger on the NX plate kit, AM is letting it go for 450.00 until the 6th
 
I would pull the trigger on that nitrous system - my local shop had my wet kit on sale for $350 bucks last spring and I couldn't say no to that. It is definitely fun - I keep the nozzles for 50shot in for daily driving - which makes for a fun commute to and from work.
 
Thanks folks. I have 1/4 inch plate spacers on each side of the rear. My rear end is off center by about 1.25 inches to the left (all mounting points are straight, and the rear wheels are perfectly aligned, possibly a bad jig from the factory?) so I also have a 1.25 inch hubcentric spacer on the left rear to even things out aesthetically. Mechanically, there is nothing wrong at all and the car drives flawlessly. I purchased 4 of those hubcentric spacers, so I still have 3 left if anyone would like a cheap pair.
2 more vids here of me accelerating to 65mph at an uphill onramp to get onto the I-95 bridge that takes you over the St. Johns river here in Jax. 1st vid is with a modest 50shot and 4 degrees retarded timing. 2nd vid is on motor/ bama tune. Car is an auto.
YouTube - Mustang GT - 50 shot NOS wet, I-95 uphill onramp
YouTube - Mustang GT - no nitrous, 6mph-65mph uphill I-95 onramp acceleration
 
Spray tint - using the same cans that you purchase on AmericanMuscle.com - but I ordered them directly from the China for half the price. Took 2 cans (they are about 1/2 the size of a standard spray bottle). I then wet sanded the fronts down to take some of the tint off - and went over it with some Testors model car window tint spray via airbrush. Also purchased a set of the VVME HID kits so that I can see and be seen at night. Also masked off the quarter panel and sprayed the tint on those side reflectors on the sides of the rear bumper.