Got 18x9 deep dish bullits . What is the best front spindles to get ? Does it matter if its from a v6 car and whats the best years ? 94 -95 or 96 -04 and do i have to change the lower balljoint ? Need to know everything ill need for this winter project ! THX
from a sn95 94-95 is what id get. spindles ect. everything. v6 or gt doesn't matter. or go cobra. you could get them from a 96 up as well. whats the back spacing of the 18's? that will help you deciding what setup to go with. iirc 96+ will suck the wheel in a little more? don't quote me on that. there's a thread in the thread of stickies for wheels and back spacing. look though that with what 25th mustang is running. for the rear you can either do what us cheaper broke folks do with ranger axles and drums or go disk.
ryan, didnt you use ranger rotors and that is why you are running a spacer to clear the dust cap?
Actually, just the opposite, '96+ spindles push the front wheels outward. Bad if you are running 9 inch wheels, you need all the fender clearance you can get. 94-95 spindles are your best bet.
You need to go over to Tech and look in the stickies. There is a thread dedicated to this subject with some good links in it.
thats why i siad dont quote me lol, thanks though for clearing it up.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?