front brake question?

tims 86 · Apr 22, 2010

hello ive got a 86 lx and im currently working on making a good rolling chassis, so far ive got willwood disc four calipers in the rear, my question is , can i still use a set of two piston cobras in the front? any suggestions? ive got 94 spindles on it.also when i get to it im going to pull the engine and get a stroker, right now i have the whole car apart, should i just rip out the old wire harness and replace it w a 88-93?

Mustang5L5 · Apr 23, 2010

You could...but the limiting factor is finding an MC that will work with the 2 piston fronts and 4-piston rears. You'll have to calculate the hydraulic ratio out by posting piston bore sizes.

Or you could just tell me and i'll do it.

Downside to 2-piston cobras is you'll need a 17" wheel to fit. If this is a drag car, look into the 99-04 GT PBR 2-piston calipers. The brakes will fit inside a 15" wheel and offer GOOD braking force. The cobra brakes are more of a road race style brake, the GT brakes will be good for 1 or 2 times in a row...perfect for drag cars.

tims 86 · Apr 23, 2010

this is just a road race car, weekend driver. thanks for the info, sounds like a new set of cobras should do the trick then.

front brake question?

tims 86

Member

Mustang5L5

That is…until I whipped out my Bissell

tims 86

Member

Similar threads

front brake question?

tims 86

Member

Mustang5L5

That is…until I whipped out my Bissell

tims 86

Member

Similar threads

Privacy & Transparency

Privacy & Transparency