Front speaker depth?

Chowder Head · Jul 25, 2008

Hey guys, I'm about to run an active component system in my 95 and am about to pull the trigger on some ID OEM mids. They have an overall diameter of 6.6 inches and 3.125 mounting depth. The diameter I'm not that worried because it's a little big, I can just trim to fit. The biggest area of concern would be the depth.

For those in the know, will these fit? What's the max mounting depth for our cars anyway?

Any help is appreciated, thanks!

Chythar · Jul 25, 2008

I think the current speakers are about 2" deep. However, there's a LOT of room behind the speakers to accommodate several inches. The only think I'm not sure of is, does the window frame come down far enough to interfere with a deeper speaker? I don't believe so, but I've never checked that clearance.

Zero Signal · Jul 25, 2008

Honestly, I don't know if that will fit with the window down. Definitely measure that door. I'm running some Diamond Audio 6.5s mounted to 3/4" MDF baffles and even they are close to the window when it's down.

Chowder Head · Jul 25, 2008

Uh-oh, I'm not liking the answers here, lol.

I pulled out my door panel when I went to replace my power window bushings and I'm kicking myself for not measuring the depth because I knew I wanted new speakers in the future..

Looks like I'll be looking around for something else but if anyone knows for sure, please let me know. Or if someone has their 95 with the door panel currently off, PLEASE, oh PLEASE can you take a measurement for me?

Thanks guys! I'm guess I'm glad I found out now that these might potentially not fit instead of when I tried to install them, ha.

SublimeRT · Jul 25, 2008

I don't have any measurements for you, but I put some Polk 6.5" components in the doors of my '94. I made a adapter ring out of some wood to install the speaker and didn't have a single problem with clearance or anything else. Here's a link to specs on the speakers I used and some pics.

db6501 Car Audio System from Polk Audio

Chowder Head · Jul 26, 2008

Alright, I think I decided on a slighter smaller mid. Before pulling the trigger, can anyone confirm these will fit?

They have a 2 5/8" mounting depth. The rest of the specs can be found here: http://www.mach5audio.com/index-2.html

Thanks!

Chowder Head · Jul 27, 2008

Wait a second. Couldn't I just make a speaker baffle using some MDF? I'm thinking I can but my only concern would be to find out the "max" baffle size that allows a larger depth speaker to fit but still allows the stereo grill to be put back on without the speakers getting in the way.

So what do you guys think now? Yes or no? The ID OEM mids are 6.6" in diameter and have a 3.125" mounting depth. Think I should be good to go if I make some baffles?

Thanks!

Oh, forgot to thank you for the post Sublime. Looks like those component speakers you installed have a 2-5/16" mounting depth. Looks like if the ID OEM mids won't fit in there using a simple spacer, then a baffle might just work. Looks promising!

Front speaker depth?

Chowder Head

Member

Chythar

Recently finished repairing my rear

Zero Signal

Active Member

Chowder Head

Member

SublimeRT

Member

Chowder Head

Member

Chowder Head

Member

Similar threads

Front speaker depth?

Chowder Head

Member

Chythar

Recently finished repairing my rear

Zero Signal

Active Member

Chowder Head

Member

SublimeRT

Member

Chowder Head

Member

Chowder Head

Member

Similar threads

Privacy & Transparency

Privacy & Transparency