• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Front Springs

  • Thread starter Thread starter FordGuy88
  • Start date Start date Jan 1, 2006
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Jan 1, 2006
#1
  • Jan 1, 2006
  • #1
I have a 88 mustang 5.0 I am tring to put drag launch springs in the front right now and it just wont work. I tried to compress the springs and stuff and it just wont work. Is there any thing I should know about them? Does any one have any tips?

Thanks alot,
Dave
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 1, 2006
#2
  • Jan 1, 2006
  • #2
What method are you using for compressing the springs? Note the kind of compressor you are using (internal, external, clamshell, etc).

Good luck.
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Jan 1, 2006
#3
  • Jan 1, 2006
  • #3
We ended up attaching the strut back to the control arm and taking the control arm loose at the k-member to give a better angle. We had to compress the crap out of it to get it to go. Also are you using the spring compressor that goes up through the center of the control arm and spring? Good luck.
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Jan 1, 2006
#4
  • Jan 1, 2006
  • #4
The compresser that goes through the middle of the control arm and spring.

Thanks,
Dave
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 1, 2006
#5
  • Jan 1, 2006
  • #5
Dave, is the rod through the middle of the compressor hitting the upper perch before it compresses the spring enough?
When that happened to me, I made a shim to put under the head of the middle shank on the compressor. The shim shifts the shank lower so you can compress the spring further before the shank hits the perch.

Good luck.
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Jan 1, 2006
#6
  • Jan 1, 2006
  • #6
I got them on. I just unbolted the a arm from the k-member and went on from there. Thanks alot everyone.

Thanks,
Dave
 
You must log in or register to reply here.

Similar threads

D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
399
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:51 AM
Rdub6
N
SOLD FOR SALE: H&R Super Sport FRONT springs only, 79-93 Mustang, 51650.77 F
  • nfilut43
  • Nov 2, 2026
  • Suspension Parts
Replies
1
Views
355
Suspension Parts Nov 10, 2026
nfilut43
N
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
984
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
295
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
S
Suspension Spring I.D. help?
  • Scott_S
  • Aug 21, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
243
Fox 5.0 Mustang Tech Aug 21, 2025
Scott_S
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?