• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Front to rear track differences

  • Thread starter Thread starter fastfoxgt
  • Start date Start date Dec 26, 2005
F

fastfoxgt

New Member
Dec 26, 2005
8
0
0
Dec 26, 2005
#1
  • Dec 26, 2005
  • #1
Some suspension questions

Hi,

Im doing a build-up of my 81 Capri and I've got a few questions hopefully some of you could answer for me which are mainly suspension related.

Here's some things about it: Its got a '84 351w backed by a C4 trans.
I plan to run the oem bullitt wheels on it with the FMS C springs underneath. My plans are to basically have the car as a saturday night special, with most of its time on the street.

First question, Is there any real difference with running the 96+ spindles over the 94-95 ones? I know the track on the 96+ ones is something like 8mm wider on each side. Has anyone using these ran into rubbing while running a similar combo? (with the 96+ spindles)
Is there an advantage over running the 96+ over the 94-95 ones?

Also, Ive read from sources that the 1990 + K-frame is supposedly better for front end suspension geometry. Is there any truth to this and is it worth getting. Or is it a case of "if it ain't broke, don't fix it" and just run the one thats in my car now.
My real goal with it is to have something that is an overall good performer, a car that takes the turns just the same as it will stop and accelerate. Right now.. its gonna get up and go better than it will turn and stop.

thanks!
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Dec 27, 2005
#2
  • Dec 27, 2005
  • #2
From what I understand, the advantages of the 96+ spindles are that they have better Ackerman angles - I never knew what that was so I looked it up: http://www3.bc.sympatico.ca/Volvo_Books/susp10.html

Also, they are designed to easily allow use of brake cooling ducts like in the 2000 Cobra R model. Other than that, as long as you are using 8" wide wheels and 245/45 or 255/40 tires, you should not have any major clearance problems. Minor fender liner rubbing probably, but nothing major.

If you can find some 94-95 spindles, I would use them, but many guys ahve used the 96+ with few if any problems.

The 90 model suspension was redesigned and allows more adjustment with the stock front end parts, so yes, the geometry is different. But I think it was more dealing with the shock towers than the K member. If you get aftermarket caster/camber plates, they have different parts for the pre 90 and 90-94 models.

Hope this helps!
 
F

fastfoxgt

New Member
Dec 26, 2005
8
0
0
Dec 27, 2005
#3
  • Dec 27, 2005
  • #3
Thanks for the input. I picked up a pair of 95 spindles today with hubs and got a 95 v6 master cylinder too. Im looking forward to putting them on once I pick the 96 rear end up. Hopefully I can find a set of Bullitt take offs in the local paper when spring hits.
 
You must log in or register to reply here.

Similar threads

W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
295
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
Suspension Setting Front Alignment - Do I care about the rear's thrust angle?
  • dan50
  • Nov 27, 2025
  • Fox 5.0 Mustang Tech
Replies
5
Views
428
Fox 5.0 Mustang Tech Nov 28, 2025
Kid wita 5oh
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
980
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
S
Mach 1 iac valve in a 4.6 gt
  • solodriverz
  • Jun 3, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
173
SN95 4.6L Mustang Tech Jun 5, 2026
squeak93
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?