Copied from my sale thread over on Modded Mustangs
Name: Justin South
Location: Greencastle, PA
Items being sold: (2) Ported Romeo 2v Cylinder Heads with Ferrea stainless steel valves, Crower High Load Springs and titanium retainers
Price: $450 +shipping
Picture(s) of item:
View attachment 196243
View attachment 196246
I recently bought these reworked romeo 2v mustang gt heads but my plans for my mustang have changed so I no longer have use for these heads. The heads are ported on the intake side and polished on the exhaust side. The previous owner had no flow numbers, so I unfortunately can't provide any either. I never had them on my car but the previous owner said they gave a noticeable gain on the top end and an additional 19 rwhp and 15 lb/ft through a full bolt on 2v. The heads come with Ferrea stainless steel exhaust valves and Crower High Load valvesprings with titanium retainers already installed. The springs are high lift springs good for boost and high lift cams. The heads are a little dirty and will most likely need to be milled and cleaned up before use.
These heads would be a good addition to an N/A, nitrous or boost project.
Name: Justin South
Location: Greencastle, PA
Items being sold: (2) Ported Romeo 2v Cylinder Heads with Ferrea stainless steel valves, Crower High Load Springs and titanium retainers
Price: $450 +shipping
Picture(s) of item:
View attachment 196243
View attachment 196246
I recently bought these reworked romeo 2v mustang gt heads but my plans for my mustang have changed so I no longer have use for these heads. The heads are ported on the intake side and polished on the exhaust side. The previous owner had no flow numbers, so I unfortunately can't provide any either. I never had them on my car but the previous owner said they gave a noticeable gain on the top end and an additional 19 rwhp and 15 lb/ft through a full bolt on 2v. The heads come with Ferrea stainless steel exhaust valves and Crower High Load valvesprings with titanium retainers already installed. The springs are high lift springs good for boost and high lift cams. The heads are a little dirty and will most likely need to be milled and cleaned up before use.
These heads would be a good addition to an N/A, nitrous or boost project.