FS: Viper T56 swap (partial)
2006 Viper T56 trans, w/6K miles. Immaculate condition.. no grinds, noises, or anything funny.
Cobra T56 bell housing
8 bolt flywheel
Mcleod pressure plate
1595.00 OBO for everything..
You will need the following to get it up/running in your Cobra..
26 spline clutch disc (150-200 bucks)
Machine down Viper input shaft to fit in modular crank (50 bucks)
Viper speed sensor and reluctor- (25-30 bucks)
Spicer yoke for Viper output shaft- (75 bucks)
This trans will hold some serious power.. I am going with a TH400, and never had a chance to install this trans..
Travis
2006 Viper T56 trans, w/6K miles. Immaculate condition.. no grinds, noises, or anything funny.
Cobra T56 bell housing
8 bolt flywheel
Mcleod pressure plate
1595.00 OBO for everything..
You will need the following to get it up/running in your Cobra..
26 spline clutch disc (150-200 bucks)
Machine down Viper input shaft to fit in modular crank (50 bucks)
Viper speed sensor and reluctor- (25-30 bucks)
Spicer yoke for Viper output shaft- (75 bucks)
This trans will hold some serious power.. I am going with a TH400, and never had a chance to install this trans..
Travis