• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Fuel Injectors, Different Years.

  • Thread starter Thread starter Taylor Brown
  • Start date Start date Mar 25, 2014

Taylor Brown

New Member
Aug 24, 2012
13
0
2
Arlington, Tx
Mar 25, 2014
#1
  • Mar 25, 2014
  • #1
I'll start off with the problem that I'm having. I've had my check engine light on for a few months now. The code came up as a misfire in cyl #1. Since then I've replaced the intake gasket, all spark plugs and replaced the ignition coil. Still hasn't fixed the light. The first time the light came up, a few weeks after, after I was going home and sitting at a light. The engine started missing right before I was about to let off the clutch to start driving. The check engine light flashed, so I pulled over and turned the engine off, then back on and drove home. No problem. A few more weeks go by and it does it again. So I did the same thing, but now it has gone to the point where it's doing it a lot more often. If I shut the engine off and turn it back over, it won't continue missing. It's also random when it wants to do it. Sometimes I'll sit at a light, and it'll drive just fine, or start missing while sitting there. Also I've noticed that in the morning when it's chilly outside, when I start the car to warm it up. It'll do it regardless. So a friend of mine said he has a 2001 3.8L block sitting in his garage. He'd said he can take the fuel injector from that engine and put it in mine, to see if that'll fix it. But I was wondering if they're different in any way? Or if it'd be okay to swap it out. Thanks for any comments and help!!
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,347
18,082
224
Massachusetts
Mar 31, 2014
#2
  • Mar 31, 2014
  • #2
I think they are the same, but before doing that, I would try swapping your fuel injectors out, and see if the misfire code follows the problem.

You can try swapping the injector, spark plug, and coil pack (you didn't say what year your car was, so this may not apply) and see if the issue follows moving the parts around.

Inspect the spark plug, what does it look like? Does it look like it's firing? Is it burned? Or oily?

Do a compression test on that cylinder. 3.8's are notorious for blowing the head gasket and it's possible the head gasket is blown here.
 
You must log in or register to reply here.

Similar threads

S
getting 90 PSI at fuel rail - help
  • skidad
  • Oct 17, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
66
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
skidad
S
M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
452
1996 - 2004 SN95 Mustang -General/Talk- Aug 9, 2026
JohnKay
J
9
1997 gt Starts then dies a few seconds after.
  • 97orange
  • Aug 13, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
245
SN95 4.6L Mustang Tech Aug 17, 2026
97orange
9
A
Check Engine codes jumping around
  • azactor
  • Jan 9, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
263
1996 - 2004 SN95 Mustang -General/Talk- Sep 24, 2026
DadLife0724
I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
132
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?