we are installing a fuel level gauge in my dads car, we found the 2 wires that go to the sender, one is a yellow/white wire, and the other one is a black wire, which is the ground wire, when we conect the yellow/white wire it goes all the way to full, but when we connect the negative wire to the gauge, it goes all the way to empty, we know that those 2 wires are the rigth ones, but how come when we connect the negative, black wire it goes to empty.
if anybody has done this install before and can offer any help, it would be greatly apreciated if u could help us out. thanks for your time
if anybody has done this install before and can offer any help, it would be greatly apreciated if u could help us out. thanks for your time