fuel line help...

[Boss 351]

Last year I just kept the stock 4 banger fuel line for my V8 carb swap. That's fine and good but the fuel line is a little close to the exhaust and I want to cool down the gas not warm it up. So I need to re-route the fuel line. I got a returnless fuel system (Holley red inline pump).

Would it be okay to use braided from start to finish?
http://store.summitracing.com/defau...t=SUM-PUMPKIT3&autoview=sku&Ntk=KeywordSearch

Or go with an aluminum fuel line and some braided for the pump and carb inlet...
http://store.summitracing.com/defau...art=RUS-639250&autoview=sku&Ntk=KeywordSearch

 

[jrichker]

I would use aluminum tubing with a braided hose at the end. Keep in mind that places that make hydraulic hoses can do the job cheaper than Summit & can custom fab almost anything.

 

[Boss 351]

Thanks I'll go with the aluminum tubing, it should keep the fuel cool provided I route it properly.