Fuel Line Upgrade

[FastSmitty]

So I have upgraded from stock rails to some new nice after market but before installing and left without a running car what all do i need to upgrade with replacing these fuel rails? do i need to replace the lines all the way from the pump to the rails? and if so is there a kit or a tech article some one can refer me to. I will need to upgrade to bigger lines because i am putting in 42lb injectors and will be running a blower sooner or later, and now im about to also install a nice 150 shot of nitrous.

Trevor

 

[UPRMike]

Here is the simplest way. Just scroll down to the last page to see the diagram and it'll fall into place:

http://www.edelbrock.com/automotive_new/misc/tech_center/install/russell_auto/641550.pdf

The adapters you'll need look like this:
MUSTANG-UPR Products.com

The rest is just a matter of figuring out what type of fuel pressure regulator you'll want to use. The nice thing about this layout is you connect everything to the existing factory lines under the frame near the firewall, so you use the in-tank pump and factory fuel filter.