Fuel Pressure

[madspeed]

its usually tucked down in there pretty good

 

[madspeed]

actually,one of those is the single wire, hang on, i'll pull a schematic

 

[madspeed]

here ya go. check it over and you should be able to determine which wire it is

 

[madspeed]

mine was rigged like yours from a previous owner. My bet is theres only one wire that is loosley inserted into the connector, and that will be it

 

[B-radster]

Thanks for the schematic. That will help. Theres alot of wiring missing on this car. I had to rewire the headlights blinkers and horn already too.

 

[B-radster]

mine was rigged like yours from a previous owner. My bet is theres only one wire that is loosley inserted into the connector, and that will be it

They are all rewired and just shoved into the plug and were taper into the "eec" cover. Those top 2 slots in diagram are empty right now. That "spout" tip helped alot earlier. It fell right in with that thing removed. Was erratic when i plugged it back in for the first minute then settled right down. Its set at 12 btc for now cant get much more because the ignition module is just about touching the tstat neck. i redid the TPS properly too its now at .934

 

[madspeed]

someone had a field day with her huh?

 

[B-radster]

Someone who didn't know unfortunately.

 

[B-radster]

Not quite sure what they were attempting to do? Not like taking out horn and headlight wire weight will drop your 1/4 time a whole lot!

 

[madspeed]

because racecar

 

[B-radster]

That single wire is no where to be found! Lol

 

[madspeed]

your images show 4 wires in the connector. Wire diagram only calls for 3. the 4th is the mising single wire

 

[B-radster]

here ya go. check it over and you should be able to determine which wire it is

Wouldnt there be 6 wires shown here?