Nazman New Member Apr 28, 2000 1,097 0 0 San Antonio, TX Dec 20, 2003 #1 Dec 20, 2003 #1 Need to help a friend and I'm not sure about this one: Motor: 347, heads, all the suporting..etc. He wants to run a fuel presure gauge (liquid filled) from the sharader valve all the time. Now, is this safe given the temp inside the engine bay? What will you guys recomend. Naz
Need to help a friend and I'm not sure about this one: Motor: 347, heads, all the suporting..etc. He wants to run a fuel presure gauge (liquid filled) from the sharader valve all the time. Now, is this safe given the temp inside the engine bay? What will you guys recomend. Naz
Lsredy2kstang Look, I'm special, dammit Nov 29, 1999 2,543 5 0 Woodstcock, Georgia Dec 21, 2003 #2 Dec 21, 2003 #2 Is there only mechanical fuel pressure gauges available, or is their electrical ones available. I would say that if it is an outside mount visible through the window with a good seal it would be fine. But then again, i could be wrong.
Is there only mechanical fuel pressure gauges available, or is their electrical ones available. I would say that if it is an outside mount visible through the window with a good seal it would be fine. But then again, i could be wrong.