Fuel Presuure

how bout with the 30lbs injectors. we were running so rich, the car would shot down. but i had the hose on it.lol. but we finally got it to work fine. but what pressure do i set it at with the 30lbs and the 255 fuel pump?

ALL BOW DOWN TO THE THREAD HERO!!!!!!!!!1lol
 
If you are using a Hoover vacuum, you set it with the car off. If not, you want the car running.

Seriously, you do want the car idling. Like was posted, disconnect and plug the vac line to the FPR with your finger. Set the pressure and reattach the line to the FPR.

I think you said you're going to get a tune soon, no? If so, I would set it at stock pressure for the tune, unless the tuner or someone here says otherwise.

I can only imagine how fun it must be to wrench on a car with you. :cheers:
 
Guero said:
I installed the adjustible fule pressure regulater, im sure its not set, i have a gauge on the fuel rail.

My Granpaw had a saying for what all those other gurs are trying to do to you :D

He would say ... "That guy is just tryin to see if he can figure out where you tied up your Goat"

Heck, I knew what you ment .............................

I put my car cover on my GT the other day, im sure its not perfect, its got a wrinkle or two.

Grady
 
HISSIN50 said:
If you are using a Hoover vacuum, you set it with the car off. If not, you want the car running.

Seriously, you do want the car idling. Like was posted, disconnect and plug the vac line to the FPR with your finger. Set the pressure and reattach the line to the FPR.

I think you said you're going to get a tune soon, no? If so, I would set it at stock pressure for the tune, unless the tuner or someone here says otherwise.

I can only imagine how fun it must be to wrench on a car with you. :cheers:
the stock pressure is 39 right?
the peoples helping me laugh there asses of when i make remarks when i cant do something its yeah its pretty fun lol
 
I always enjoy your and Aaron's threads/posts Guerro. We know you know what you're doing but your delivery on the forums makes for some funny chit.

You are correct - 39 PSI with the vacuum line off (this simulates WOT pressure) is the stock setting AFAIK.

Good luck bud.