• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fuel Rail Crossover Hoses

  • Thread starter Thread starter Window
  • Start date Start date Dec 22, 2017
W

Window

Active Member
Feb 13, 2017
111
9
28
Dec 22, 2017
#1
  • Dec 22, 2017
  • #1
When i took off the fuel rail there were 3/8 nylon hoses. I was going to replace it with some fuel injection hose and grabbed some gates 5/16. It fits snug but not tight, should i use 1/4 for a really tight fit or stick with the 5/16. Would the flow effect anything? Im going to use efi clamps as well. Anyone ever replace the fuel rail crossovers that can lead me in the right direction on sizing?
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,649
214
Acworth, GA
Dec 22, 2017
#2
  • Dec 22, 2017
  • #2
I've had to do it before, but not on my car. I believe I used 5/16. Once you have the clamps on there give it a good pull and see how secure it is.

Kurt
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Dec 22, 2017
#3
  • Dec 22, 2017
  • #3
I've done it with the nylon fuel line they sell in parts stores. Had to heat the nylon hose in boiling water to get it on. Once that crap was on the car it leaked. Ended up using fuel line clamps and all was good.

I learned from that to use 5/16 fuel injection hose just like you're doing. Way easier.
 
W

Window

Active Member
Feb 13, 2017
111
9
28
Dec 22, 2017
#4
  • Dec 22, 2017
  • #4
Alright ill use the 5/16 thanks guys.
 

nelzfoxes

5 Year Member
Aug 20, 2013
472
325
94
Dec 24, 2017
#5
  • Dec 24, 2017
  • #5
Hmmm... I just got some 1/4 hose to modify fox rails onto lightning intake. I hope it fits.
 

nelzfoxes

5 Year Member
Aug 20, 2013
472
325
94
Dec 28, 2017
#6
  • Dec 28, 2017
  • #6
I KNEW I responded to this thread! I spotted the other one in tech and thought I missed something. Haha! BTW it definitely looks like 1/4 inch id is the correct hose. It goes on the rails nice and snug. The factory hose looks bigger because there is an insulation over clear plastic fuel hose.
 

nelzfoxes

5 Year Member
Aug 20, 2013
472
325
94
Dec 29, 2017
#7
  • Dec 29, 2017
  • #7
 

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Dec 29, 2017
#8
  • Dec 29, 2017
  • #8
I know I was trying to figure out where my reply went but figured out I replied to the tech post!
Anyway I'm pretty sure I used 5/16" fuel hose on my 393w build......just went out into the freezing garage
to check but can't see what size because I put some plastic looming over the hose for protection.
Like I said 99% sure it was 5/16" , have about 250mi. on build and no fuel leaks so it must be right.
 

nelzfoxes

5 Year Member
Aug 20, 2013
472
325
94
Dec 30, 2017
#9
  • Dec 30, 2017
  • #9
Steel1 said:
I know I was trying to figure out where my reply went but figured out I replied to the tech post!
Anyway I'm pretty sure I used 5/16" fuel hose on my 393w build......just went out into the freezing garage
to check but can't see what size because I put some plastic looming over the hose for protection.
Like I said 99% sure it was 5/16" , have about 250mi. on build and no fuel leaks so it must be right.
Click to expand...
Darn. I have 1/4 id hose. I guess I will have to look for the 5/16. But I might run the 1/4 for a while.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Dec 30, 2017
#10
  • Dec 30, 2017
  • #10
If you can get it on there....use it. No need to change it if you can get it to work.
 
You must log in or register to reply here.

Similar threads

M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
537
1996 - 2004 SN95 Mustang -General/Talk- Aug 9, 2026
JohnKay
J
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
837
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
599
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
163
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
483
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?