Fuel rail fitting question?

GTA_V6_Mustang

Active Member

Nov 29, 2004

1,326

3

39

Miami, FL

Jul 26, 2011

#1

• Jul 26, 2011

• #1

Ok well I have been at 100 shot for a while now. I love it but now I want to go to a 150 shot. I want to keep the pressure cutoff switch but want to add a fuel pressure gauge. Im adding an electronic fuel pressure gauge and need to put the transducer on the fuel rail too. My question is, does anyone know where I can get some kind of fitting for the fuel rail that allows me to put 2 things on there like my nitrous bottle fitting that I have both the nitrous pressure gauge and bottle warmer transducer cutoff switch. Thanks in advance, I hope one of you guys can help me out.

 

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

Jul 27, 2011

#2

• Jul 27, 2011

• #2

I went through the same thing while back. I just got a accufab fuel regulator that has the 1/8 npt fitting, hook up the fuel pressure switch there and leave the safety switch on the fuel rail.

OR someone has different idea...

 

toyman

10 Year Member

Jul 19, 2007

1,944

54

79

Vernon BC

Jul 28, 2011

#3

• Jul 28, 2011

• #3

I'm guessing the fitting is at the schrader valve. The thread into the rail is a 1/16 NPT. To hook both transducers you need a 1/16 (male) to 1/8 (female) NPT adapter. Then a 1/8 T (male with 2 female ends). You will thread the transducers into the T on each side. Leastways that's what I would do.

 

GTA_V6_Mustang

Active Member

Nov 29, 2004

1,326

3

39

Miami, FL

Jul 29, 2011

#4

• Jul 29, 2011

• #4

^^ question is where do i get that tee? and hollywood, that sounds like a good idea, i was thinking about that but couldnt find an adjustable regulator with a port to attatch, ill have to check accufab

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

PA

Jul 29, 2011

#5

• Jul 29, 2011

• #5

I have some alum extensions I make for FPR gauges off the stock shrader location that could be tapped to do what you are looking for, nice and clean.

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Jul 29, 2011

#6

• Jul 29, 2011

• #6

i got mine from summit. part number NOS-16775NOS

 

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

Jul 29, 2011

#7

• Jul 29, 2011

• #7

Rick 91GT said:

I have some alum extensions I make for FPR gauges off the stock shrader location that could be tapped to do what you are looking for, nice and clean.

Click to expand...

Post a picture of one, I am interested in one of this.

 

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

Jul 29, 2011

#8

• Jul 29, 2011

• #8

legalize420 said:

i got mine from summit. part number NOS-16775NOS

Click to expand...

This will work but don't you have to buy another fitting to attach this to the fuel rail schrader valve?

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Jul 29, 2011

#9

• Jul 29, 2011

• #9

hollywoodstang said:

This will work but don't you have to buy another fitting to attach this to the fuel rail schrader valve?

Click to expand...

if you dont already have one, yes