Fuel Rail Help.

[MikeROD16]

so i got these fuel line disconnect tool from AmPro, its metal and kinda looks like a scissor. but i cant seem to disconnect the fuel rail. i slipped it in the line and it made the sping expand a little but i tried pulling them apart and nothingggg. im so frustrated. plz, if you have any tips, tell me.

 

[BYRDPE]

Keep at it...it'll come loose.
With the tool installed push the rails together, wiggle them and pull.
You can spray some WD40 in there to loosen up some of the crud in there.

 

[irish]

Usually there is crap in there as mentioned earlier which prevents you from getting the fitting all the way in, I twist it back and forth abit and usually it goes in and you can separate the fittings.

Matt

 

[vristang]

fuel lines are a beotch...


Keep pulling on them, they'll break loose.........

 

[Shakerhood]

I have the little plastic tools, I just sprayed a little PB Blaster in there and was able to work the line off.