• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fuel Sending Unit Relay Switch

  • Thread starter Thread starter BlackLX5.0
  • Start date Start date Jan 15, 2006
  • 1
  • 2
Next
1 of 2 Next Last

BlackLX5.0

New Member
Nov 14, 2005
76
0
0
Jan 15, 2006
#1
  • Jan 15, 2006
  • #1
I finally got the stang running but it stopped pumping gas, so i took the fuel sending unit relay switch out and put a wire in it and it started pumping. What do you guys think a new fuel sending unit relay switch will cost?

Thanks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 15, 2006
#2
  • Jan 15, 2006
  • #2
The fuel level sending unit pathways should have nothing to do with the fuel pump energizing....... Are you talking about the fuel pump relay?
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Jan 15, 2006
#3
  • Jan 15, 2006
  • #3
if its a the fuel pump relay its about 16.00 dollars
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Jan 15, 2006
#4
  • Jan 15, 2006
  • #4
um anyone know where I can find this fuel sending unit, since my fuel pump works, and the injector harnesses are fine, and it still won't fire...
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
Jan 15, 2006
#5
  • Jan 15, 2006
  • #5
The fuel sending unit is for the Gas gauge level.
The Fuel Pump relay is what turns on the pump.
The relays can work intermittantly and also can get stuck on or just stop working..If you have fuel to the injector supply rail then maybe you dont have spark?
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Jan 15, 2006
#6
  • Jan 15, 2006
  • #6
i'm gettin fuel at least to the schrader valve, and spark (engine starts with ether) and my injector wires are ok, so...what the balls?
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
Jan 15, 2006
#7
  • Jan 15, 2006
  • #7
Sounds like Injectors are not squirting. I am not sure what all the relay you bypassed controls. If its mass air I know the eec looks for the fuel pump to be running. I belive it monitors the relay you took out. Maybe thats why it wont run.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 15, 2006
#8
  • Jan 15, 2006
  • #8
Did you do the stuff suggested on your other thread?

Good luck.
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Jan 15, 2006
#9
  • Jan 15, 2006
  • #9
my fuel pump is on, i have all new relays. think it might be the computer? the computer isn't original. my motor used to be carbureated but the guy put efi on since gas went up (BIG MISTAKE) and used some junkyard upper/lower manifolds, harness and computer
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Jan 15, 2006
#10
  • Jan 15, 2006
  • #10
yes i did. my injectors aren't getting 12V fully, and my wires are fine. I'm stuck. I'm about to just hang it up and start saving my money for a fuel press. regulator, edelbrock performer, and holley 4160 and an air cleaner...and scrap this bs efi.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 15, 2006
#11
  • Jan 15, 2006
  • #11
You could run a temporary (for diagnostics) jumper wire to the injector harness to confirm that the lack of 12 volts is the issue. If so, find the bad patch of wire (make sure nothing in pinched between hard parts, etc) or just run a new length of wire.

Good luck.
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Jan 15, 2006
#12
  • Jan 15, 2006
  • #12
jumper it from where?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 15, 2006
#13
  • Jan 15, 2006
  • #13
A key-on 12 volt source (the EEC relay output would be nice, since that is its original source). Any number of circuits would really work though (for 5 seconds worth of diagnostics only).
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Jan 15, 2006
#14
  • Jan 15, 2006
  • #14
what about jumping a hot from the injector red wire to the + post on the solenoid, and grounding it to the chassis somewhere?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 15, 2006
#15
  • Jan 15, 2006
  • #15
ZephyrMotorspor said:
jumper it from where?
Click to expand...
If you need 12 volts, the battery is the obvious source.

If you are electrically challenged, speak up. I have some resources to help in that department.

The diagrams on my reply to your post are sufficient to get you where you need to go if you have a rudimentary knowledge of electricity.
 
Z

ZephyrMotorspor

New Member
Jan 8, 2006
88
0
0
Tampa, Fl
Jan 15, 2006
#16
  • Jan 15, 2006
  • #16
i just don't have that much wire to work with j lol. thats why i hate efi...brings to much electrical crap into the picture = more prone to failure, whereas with a carb, you got fuel n spark...you gotta a running car
 

BlackLX5.0

New Member
Nov 14, 2005
76
0
0
Jan 15, 2006
#17
  • Jan 15, 2006
  • #17
Thanks for the help everyone, its greatly appreciated, But I got another question lol. I put my starter on today, but its not getting fire to make the starter turn over, but if I take a wire from the starter to the starter relay and cross them, it will start like that. What do you guys think might be wrong?

Thanks :SNSign:
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 15, 2006
#18
  • Jan 15, 2006
  • #18
That's a very vague description. What color are the wires? Are they the big thick wires or smaller ones?

Here's a checklist:

Since some of the tests will bypass the safety interlocks, make sure that the car is in neutral and the parking brake is set. Becoming a pancake isn’t part of the repair process…

Check battery, terminal connections, ground, starter relay switch (also known as solenoid) and starter in that order.

A voltmeter is handy if you are familiar with how to use it to find bad connections. Measure the voltage drop across a connection: more than .5 volts across a connection indicates a problem.
See http://www.fluke.com/application_notes/automotive/circuit.asp?AGID=1&SID=103 for help


1.) Will the car start if it is jumped? Then clean battery terminals and check battery.

2.) Check the battery to engine block ground, and the ground behind the engine to the firewall.

3.) Jump the big terminals on the starter relay next to the battery with a screwdriver - watch out for the sparks! If the engine cranks, the starter and power wiring is good. The starter relay is also known as a starter solenoid.

4.) Then pull the small push on connector (red wire) off the starter relay (Looks like it is stuck on a screw). Then jump between the screw and the terminal that is connected to the battery. If it starts, the relay is good and your problem is in the rest of the circuit.

5.) Remember to check the ignition switch, neutral safety switch on auto trans and the clutch safety switch on manual trans cars. If they are good, then you have wiring problems. See http://www.autozone.com/images/cds/gif/large/0900823d80195963.gif for 88-90 year cars .OR see http://www.autozone.com/images/cds/gif/large/0900823d80195964.gif for 91-93 year cars. See http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp for 94-95 model cars.

6.) The starter may be hung, loosen up the bolts that hold it on, and give it a good whack with a big hammer. Tighten up the bolts and try again.

7.) If that doesn't work, use a jumper cable from the positive lead on the battery direct to the starter post where the big wire from the relay connects. If it cranks then, it is the power wire from the relay gone bad. This will be hard to do, since there isn't much room to do it.

8.) Pull the starter and take it to Autozone or Pep Boys and have them test it. Starter fails test, then replace it. If you got this far, the starter is probably bad.
 

BlackLX5.0

New Member
Nov 14, 2005
76
0
0
Jan 16, 2006
#19
  • Jan 16, 2006
  • #19
Thanks for the help, I appreciate it. The starter is good, I just went to Autozone and had it tested yesterday. Im thinking its the nuetral safety switch, because the ways you said to start it up I have tried and it worked.

Thanks again :SNSign:
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 16, 2006
#20
  • Jan 16, 2006
  • #20
Sounds like #4 and 5 on Jrichker's list are where you are at.
I will echo a little of what is in Jrichker's post.

If you put a test light on the little slide-on (S terminal) on the solenoid and DONT have 12 volts to that little wire while cranking, the signal is not making it to the solenoid in the first place.

If so, the neutral safety switch is where I would look too. If you dont have 12 volts [during cranking] going into the neutral switch (BE VERY CAREFUL DURING ALL THIS TESTING SINCE THE CAR MIGHT DECIDE TO FINALLY START), then I would look further upstream (toward the ignition switch itself, and the wiring in between).

JRichker will have more detailed info for you.

Good luck.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

M
05 Mustang GT With Annoying P0463 Issue
  • Machbud
  • Oct 17, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
191
2005 - 2009 Specific Tech Oct 24, 2026
manicmechanic007
W
Engine My engine dies after running 10 to 15 minutes under high heat.
  • Wylieone
  • Jun 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
302
Fox 5.0 Mustang Tech Jun 22, 2026
Mustang5L5
S
1990 foxbody 5.0 fuel system.
  • staceyj
  • Nov 28, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
631
Fox 5.0 Mustang Tech Nov 28, 2025
Mustang5L5
Engine Fuel not pumping
  • Creomod
  • Apr 13, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
2K
Fox 5.0 Mustang Tech Jul 22, 2026
Noobz347
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
595
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?