Functional Ram Air kit

G

gutlessTahoe

New Member

Apr 19, 2004

136

0

0

Port Angeles, WA

Jun 3, 2004

#1

• Jun 3, 2004

• #1

Will a functional ram air kit and hood be a better setup then using a regular fenderwell intake?
Also, will ram air fit with a S/C like the Kenne Bell for a 88 GT?

 

ECU5.0

Banned

Jan 10, 2004

1,803

1

0

raleigh, nc

Jun 3, 2004

#2

• Jun 3, 2004

• #2

the ram air kit is technically better than a fenderwell kit because it pushes air into the engine. im pretty sure it will fit with a kenne belle supercharger because they have the same stock location of the air filter

 

8

89 Saleen#455

Founding Member

Dec 29, 1999

519

5

39

New England

Jun 3, 2004

#3

• Jun 3, 2004

• #3

I'm not 100% sure, but judging by the attached photo's from Banshee's Ram Air Hood Website.....I'd have to say No. There just doesn't appear to be enough room between the distributor and the outer lip of the Ram Air intake to accomodate the long snout of the Kenne Bell Whipple Charger. I could be wrong...but that's my opinion based on the photo's. Go to the 5.0 Ram Jet section of the website for fox body pictures.

http://www.bansheeperformance.com/Banshee Performance.htm

 

ECU5.0

Banned

Jan 10, 2004

1,803

1

0

raleigh, nc

Jun 3, 2004

#4

• Jun 3, 2004

• #4

but he could possibly get the cervinis mach 1 ram air hood...that would probably work

 

hemi_fan

Active Member

Apr 8, 2004

279

3

28

Ontario, Canada

Jun 3, 2004

#5

• Jun 3, 2004

• #5

That looks pretty cool on a 5.0 I wondered if you could get something like that... Too bad you can only use it with a stock Intake, otherwise id probably look at getting one.

 

G

gutlessTahoe

New Member

Apr 19, 2004

136

0

0

Port Angeles, WA

Jun 4, 2004

#6

• Jun 4, 2004

• #6

Well, if I do get it to work, will the S/C benefit more from the Ram Air or will a fenderwell intake, or engine bay intake work just as well?

 

ECU5.0

Banned

Jan 10, 2004

1,803

1

0

raleigh, nc

Jun 4, 2004

#7

• Jun 4, 2004

• #7

fenderwell or ram air will work better than a normal engine bay setup because its taking air that isnt as hot and puttin it in the engine...but than you said you have s/c and that is jacking up the air intake temps right there. you should think about getting an intercooler if you really want to cool things down

 

TheBocSez

New Member

Feb 3, 2004

652

0

0

Converse, TX

Jun 4, 2004

#8

• Jun 4, 2004

• #8

hemi_fan said:

That looks pretty cool on a 5.0 I wondered if you could get something like that... Too bad you can only use it with a stock Intake, otherwise id probably look at getting one.

Click to expand...

Is that true?? If so, that sux, I was wanting to get the Stormin Normin hood with the ram air kit, but if I am limited to the stock intake forget it. Unless there is a good aftermarket intake I can use that is the same height as stock.

 

ECU5.0

Banned

Jan 10, 2004

1,803

1

0

raleigh, nc

Jun 4, 2004

#9

• Jun 4, 2004

• #9

you can use any intake with the stormin normin hood..its a cowl hood also so youll have good clearance

 

larrendeuce

Member

Sep 13, 2003

649

1

19

Southern NJ

Jun 4, 2004

#10

• Jun 4, 2004

• #10

The kit he was talking about its the banshee ram air shaker hood. You can use any intake with the cervini's ram air. Here's a pic to give you an idea of how it works.

You can only use superchargers that use the stock airbox location, prochargers and vortechs won't work with it. As far as I know, the Kenne bell is the only one that works with the stock airbox.

 

_jb_

New Member

Mar 4, 2004

808

0

0

Michigan, Berrien County

Jun 4, 2004

#11

• Jun 4, 2004

• #11

Do you think there would be enought clearence with Cervini's 1.5" Ram Air Hood when you have a KB s/c? Or would the Stormin' Norman hood be the only way to go?

 

66 Tiger

New Member

Jul 13, 2003

249

0

0

Virginia

Jun 4, 2004

#12

• Jun 4, 2004

• #12

hemi_fan said:

Too bad you can only use it with a stock Intake, otherwise id probably look at getting one.

Click to expand...

Yeah, don't worry about not being able to use that hood with aftermarket intakes. Mine clears with no problems. Maybe call Cervini's about the supercharger fit though?