Fuse help please. 73 Mach 1

[Curtis Harper]

Normally I would not ask a question like this and just get in there and look but current physical limitations make it difficult to have a quick look at the fuse panel. 73 Mach 1, Most of my gauges have stopped working, fuel, oil, charge, temp. Is there a common fuse on all of these? Thank you in advance.

 

[Mcmahst]

There is one fuze that powers most of the gauges, but it doesn’t power the fuel gauge. Here’s an illustration of a fuze panel. The fuze identified in this illustration as F6 is the fuze for the four gauges. The fuel gage is powered by the CVU; a small voltage reducer mounted on the backside of the gauge set. Good luck.

 

[Curtis Harper]

There is one fuze that powers most of the gauges, but it doesn’t power the fuel gauge. Here’s an illustration of a fuze panel. The fuze identified in this illustration as F6 is the fuze for the four gauges. The fuel gage is powered by the CVU; a small voltage reducer mounted on the backside of the gauge set. Good luck.

Thank you