FYI-> Big Trouble at VT Engines~!!

Katmandu · Nov 18, 2007

If you know anyone that has stuff pending with VTE. Beware of what's going on.

http://www.modularfords.com/forums/showthread.php?t=96049&page=22

Tim2002GT · Nov 18, 2007

Sounds like there is going to be a lot of disappointed people!

SilverBullet00 · Nov 18, 2007

Never buying anything from them again! How can you do business like that??

SaleenGT2001 · Nov 18, 2007

too many pages to read.......................what was going on?

DBMSTNG · Nov 18, 2007

unfortunately, this happens alot in auto performance industry. what usually happens is the owner gets in financial trouble, then starts "borrowing" customer money thinking if he's just given enough time, he can make up for his mistakes. they just end up digging themselves deeper and deeper in trouble. they then rip off customers , trying to keep the business open.

'03GTinFLA · Nov 18, 2007

That place made quality parts and had such a good rep. That really sucks. I was just about to have them do some custom grinds for my blower cams because I can't find any good used ones. I think I'll look toward MPH instead.

tomustang · Nov 18, 2007

Seems like the owner knows he has customers pouring in so he is trying to build the company faster to make more money, but is too cheap to pay for this, especially manpower to keep up with the orders.

I hope this gets resolved

Zax · Nov 18, 2007

where are they located?

urban96 · Nov 18, 2007

damn, i dont see this ending good for VT

ADRENLN · Nov 18, 2007

great. i have to read the hole thing. i just had them build my block but it took them 6 months. i dont even have it yet. i should get it this week. i have talked them alot because of the delay. this is really out of hand that they could not get me my engine for so long.

i hope it together right with the proper parts that are advertised to come in the stroker block!!!!!!

i dont want to blow the engine because of their cost cutting efforts.

it took me so long to get to this point with my car and now im gonna get a ****ty short block

TweekedGT · Nov 18, 2007

'03GTinFLA said:
That place made quality parts and had such a good rep. That really sucks. I was just about to have them do some custom grinds for my blower cams because I can't find any good used ones. I think I'll look toward MPH instead.

*Edited to clean up erroneous info.*

Rick

ADRENLN · Nov 18, 2007

****!!!!!! i just reade through that thread. its not the parts that are of concern, its the payment. it seems like the owner of vt is out sourceing the engine builds. but vt is not paying them for the engines so they wont ship them until they get payment.

this is really bad for me....this explains why its taking so long to get my block at this point i just hope i get it. i might be getting screwed bad on this one.

this is terrible. my name was listed in the thread of engines built and waiting for payment. i paid vt in full so long ago.

SilverBullet00 · Nov 18, 2007

That sucks man. I thought VT was much better built than that. It might be worth calling up a lawyer and getting some legal advice.

blackfang · Nov 18, 2007

That's what happens when they are sold and bought and employees and the work is outsourced.

mrvax · Nov 18, 2007

Had a good Mustang shop on LI go down the same way. It was called Jade Performance. They had some real sharp employees/owner there.

It really is a shame to lose a good place. It's worse by far for a customer to lose money!

ADRENLN · Nov 18, 2007

man, im sick to my stomach over this. i dont know what to do or if there is anything i can do.

no one at vt ever let on for a second that there was any problems there. i just kept getting strung along about why it was taking so long. back order and everything else....it must of all been bull crap.

DTNODYA · Nov 18, 2007

Call em' again and see what they say...

That's really ****ty though.

hotmustang331 · Nov 18, 2007

Man that freegin sucks! I was under the impression that JIM and SCOTT were in charge and they built everything inhouse. It took FOREVER back when I bought my cams 2 years ago or so....I bet the same things were going on even then.

I for one feel betrayed by Scott and Jim for not being honest and covering all this up...especially acting like they own the place when they are just middle men and someone else builds the motors.
Now as for the looser REAL owner....that guy desirves to loose it all and hes the real retard.

hotmustang331 · Nov 18, 2007

TweekedGT said:
Don't bother, VT does the stuff for MPH. Curious to see what they will do now.

Not anymore...as of about a year ago. Proline does all of MPHs work. I think MPH was running into simular issues, along with warranty issues (cheap parts maybe?), and switched back to proline.

scupking · Nov 18, 2007

Man looks like will be going with comp cams next year, I was going to get VT stage one but not after this.

FYI-> Big Trouble at VT Engines~!!

Katmandu

Tim2002GT

SilverBullet00

New Member

SaleenGT2001

Well-Known Member

DBMSTNG

I fantasize about it being BIG!

'03GTinFLA

Member

tomustang

Psychotic Member

Zax

New Member

urban96

bubb rubb says:"woo woooooo"

ADRENLN

Active Member

TweekedGT

New Member

ADRENLN

Active Member

SilverBullet00

New Member

blackfang

mrvax

Stay thirsty my friends

ADRENLN

Active Member

DTNODYA

Member

hotmustang331

Active Member

hotmustang331

Active Member

scupking

Active Member

Similar threads

FYI-> Big Trouble at VT Engines~!!

New Member

Well-Known Member

I fantasize about it being BIG!

Member

Psychotic Member

New Member

bubb rubb says:"woo woooooo"

Active Member

New Member

Active Member

New Member

Stay thirsty my friends

Active Member

Member

Active Member

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency