• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

G** Damn door handles!~! AHH!

  • Thread starter Thread starter bloopbloob
  • Start date Start date Mar 16, 2008

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Mar 16, 2008
#1
  • Mar 16, 2008
  • #1
K well i'm on my 3rd set of door handles now... finally got metal ones for the last install. went to get back in my car after getting gas, and it's like a limp noodle. didn't snap or anything opening the door before, not sure what happened... but it's dark and cold out, lots of snow, i can't deal with this right now. just mad . i've been inside the door several times before, installed handles 3 times now, and a window, but can't remember for the life of me how the setup works. i doubt the handle is broken since it's metal, took a quick look (but its dark out), didn't see anything... can the linkage just slip off or something like that?? i know the handles on these cars are notoriously bad, but why am i having so many issues!!!! thought the metal handles would solve this.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Mar 16, 2008
#2
  • Mar 16, 2008
  • #2
yes...the linkage bar can just fall off the lock mechanism. It happened to me three times so far with my metal handles. It always happens in the cold....with snow or ice.

Last time it happened i pressed on a small piece of sheet metal over the linkage bar and it has not happened since then. I hate the door handles on our cars.

One piece of advice i can give you is to keep the entire system well lubricated...i use lithium grease....it seems to work best. good luck man.
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Mar 16, 2008
#3
  • Mar 16, 2008
  • #3
ok. good to know. thanks. i hope thats all it is. we just got a nice dump of snow yesterday, and now its melting and my car is covered in ice. i just hope its a simple fix. very tired of the door handle game.....
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Mar 17, 2008
#4
  • Mar 17, 2008
  • #4
ok well took a look today. i can't see anything broken on the handle. i have power locks, and the lock doesn't move on the side with the broken handle. so i'm guessing the linkage slipped. will i have to remove the handle to get the linkage back on? or will i be able to just remove the interior panel and hook it back up? just want to know if i need to pick up some rivets or anything else ahead of time...
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Mar 18, 2008
#5
  • Mar 18, 2008
  • #5
ttt

anyone? i know its a common problem! can i just hook the linkage back up? or does the handle have to come off to do this?
 

MahFiVeOh

Founding Member
Apr 26, 2002
531
9
49
Ontario, Canada
Mar 18, 2008
#6
  • Mar 18, 2008
  • #6
That plastic "thingy" that connects the handle to the linkage probably broke.The handle will go "limp like a noodle" when it breaks.When i replaced my handles with new metal ones they recommended replcacing them at the same time.

Take the panel off, it'll be easier to do.
 
You must log in or register to reply here.

Similar threads

R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
165
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
720
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
393
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
188
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?