Gasket sealer on intake gasket with Print-o-Seal?

jd-hart

Member

Jun 29, 2005

124

1

16

Greensboro, NC

Jul 30, 2008

#1

• Jul 30, 2008

• #1

I am getting ready to install my lower intake manifold. My intake gaskets are Fel-Pro 1262's with the Print-o-Seal stuff around the ports. I have heard that are you not allowed to place any additional sealer on these. Due to it eating the orginal sealer????

But in searching, I have found that many people do add sealer to the coolant ports, but I could not tell if they were using the Print-o-Seal gaskets.

I just want to make sure that I get it sealed up as good as I can, and not have to pull it back off.

Thanks.....

 

jd-hart

Member

Jun 29, 2005

124

1

16

Greensboro, NC

Jul 31, 2008

#2

• Jul 31, 2008

• #2

bump....

 

EMW150

Founding Member

May 22, 2000

2,020

1

46

Roaring Spring,PA

Jul 31, 2008

#3

• Jul 31, 2008

• #3

jd-hart said:

bump....

Click to expand...

Yes, definately need sealant around the coolant ports.

 

squeak93

15 Year Member

Jun 2, 2005

2,288

372

164

Joplin, Missouri

Aug 1, 2008

#4

• Aug 1, 2008

• #4

For the record, which type does anyone suggest to use (hi temp black, the brown bottle junk) or what?

 

EMW150

Founding Member

May 22, 2000

2,020

1

46

Roaring Spring,PA

Aug 1, 2008

#5

• Aug 1, 2008

• #5

Ultra Black is my pick.

 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

15 Year Member

Nov 11, 2003

6,945

1,598

223

Northern KY

Aug 1, 2008

#6

• Aug 1, 2008

• #6

I used to put that stuff around every single opening in the intake/heads....then a month or so ago my buddy was helping me do my head swap and he said he's never put it on ANY of them. That's how we put it on and so far so good, nothing is leaking. Also he uses a big thick bead of it on the front and back instead of the cork/silicone gaskets...which is a place that almost always leaks on me and it's holding up great.

 

Fast63

New Member

Sep 20, 2007

717

0

0

Aug 2, 2008

#7

• Aug 2, 2008

• #7

it's not necessary, definitely not around the intake ports. I put some around the coolant ports for good measure. I also use the bead of RTV in the front and back of the intake, works great.