• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Gauge Questions

  • Thread starter Thread starter Shadrack
  • Start date Start date Nov 20, 2005

Shadrack

New Member
Aug 2, 2005
95
0
0
Nov 20, 2005
#1
  • Nov 20, 2005
  • #1
I'm thinking about getting the 2-Gauge Cowl Grille for my car. Holds two 2 5/8" gauges.



Question is, would you all recommend getting mechanical guages instead of the electrical gauges? I already had an Electrical Oil Pressure gauge fail resulting in a near stroke driving down the highway. So, the two gauges would be for Oil Pressure and Fuel Pressure. My understanding is that mechanical gauges are much more accurate as well. But of course, if I went electrical, they would be mounted inside the car.

Also, what about Speedo's? Should I get a mechanical speedo and try to hook it up using the right gears and cables, or get an Electical and try and set it up with the "halls effect" sender (not sure how to dial in the speedo correctly?)? All I want to know is if i'm going 60mph or not driving down the road. The mechanical speedo is $80, the electronic speedo is $250. Would it be worth the money????
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Nov 20, 2005
#2
  • Nov 20, 2005
  • #2
I would go with mechanical gauges.

Also could you pm me with a link to where you found that guage pod, I've been looking for something like that so i can get my fp guage outta the inside of my car.


Matt
 

jadedinpa

Founding Member
Aug 2, 2002
1,094
0
0
lancaster, pa
Nov 20, 2005
#3
  • Nov 20, 2005
  • #3
it says latemodelrestoration.com in the background of the pics, so thats probably a good place to start looking for those cowl covers.

as far as speedo is concerned, stick with a cable-operated unit. you can get an adaptor to use the stock cable with an aftermarket gauge, so it'll be easy as pie to install.

i take it you are making a completely aftermarket cluster?
 
9

95cobradude

Banned
Apr 1, 2005
194
0
0
long island, ny
Nov 20, 2005
#4
  • Nov 20, 2005
  • #4
mechanical all the way
 

Shadrack

New Member
Aug 2, 2005
95
0
0
Nov 20, 2005
#5
  • Nov 20, 2005
  • #5
Yes..... i'll be removing the 140mph speedo instrument cluster and making a complete AutoMeter cluster out of an aluminum plate. All i'm going to have is a 120mph speedo, 10,000 rpm tach, fuel level, and voltmeter in the cluster. Two gauges outside, and two gauges in the A/C Vents.
 

jadedinpa

Founding Member
Aug 2, 2002
1,094
0
0
lancaster, pa
Nov 20, 2005
#6
  • Nov 20, 2005
  • #6
sounds like a good setup.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,167
17,862
224
Massachusetts
Nov 20, 2005
#7
  • Nov 20, 2005
  • #7
In the cowl??

I would go mechanical, but use stainless line for oil instead of that nylon crap they give you.
 
I

iwashmycar

20+ Year Stangneter
Apr 7, 2004
1,236
1
39
Columbus, Ohio
Nov 20, 2005
#8
  • Nov 20, 2005
  • #8
do it...do mechanical...braded line...itll be awesome

-adam
 
You must log in or register to reply here.

Similar threads

Removing speedo cable from the VSS
  • 91AOD5.0LX
  • Mar 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
718
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
91AOD5.0LX
Electrical Oil Pressure Gauge IN Dash Cluster Unresponsive
  • Nine Finger Wrenching
  • Jan 7, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
936
Fox 5.0 Mustang Tech Jan 8, 2025
85GTStangGuy
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
719
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
G
oil pressure gauge wiring
  • Gandalf79
  • Jun 3, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 8, 2024
AeroCoupe
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
293
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?